xxwhiteneonxx's project log! because racecar!

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Dec 14, 2011 9:58 am

Used parts from a semi truck to make me an intake

Looks good imho.

Johny · Post by **Johny** » Wed Dec 14, 2011 4:30 pm

I cream my pants everytime I open your log Cody. Shits looking fucking awesome bro

esteinmaier · Post by **esteinmaier** » Wed Dec 14, 2011 6:03 pm

XxWhiteNeonxX wrote:
RobsProjectSOHC wrote:
My new GIANT fuse lol.

is it capable of 1.21 gigawatts?
looks like christmas came early....nice parts, gunna have to read through your whole thread now.
its a 250amp fuse..

Youll be surprised how far this project has come in a little over a year..

250 amps? Shit, with a fuse that big, you could almost melt the terminal off your battery before it would do it's job.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Dec 14, 2011 7:21 pm

Johny wrote:I cream my pants everytime I open your log Cody. Shits looking fucking awesome bro

Thanks buddy! I appreciate the creaming of the pants

and erick, whats wrong with the fuse being that big? The fuse itself only takes up about 1/4 of that plastic..

esteinmaier · Post by **esteinmaier** » Wed Dec 14, 2011 7:47 pm

Its not the size of the fuse. Its the capacity. 250 amps is enough to melt any circuit in your entire car, with the exception of the starter. so if there was a problem, the wiring would be the fuse, not the fuse.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Dec 14, 2011 7:51 pm

esteinmaier wrote:Its not the size of the fuse. Its the capacity. 250 amps is enough to melt any circuit in your entire car, with the exception of the starter. so if there was a problem, the wiring would be the fuse, not the fuse.

well the reason i got a fuse this big, is countless neon forums, countless people, etc.. all told me that 250 amp was what i needed.

esteinmaier · Post by **esteinmaier** » Wed Dec 14, 2011 9:09 pm

Is it for a stereo? 100 amps is good for about 1400 watts of amp.

r/tguy02 · Post by **r/tguy02** » Wed Dec 14, 2011 10:03 pm

I'm pretty sure I told you I used a smaller fuse than that Cody, I've only got a 150 in there now because I knew 200 was too big

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Dec 14, 2011 10:59 pm

esteinmaier wrote:Is it for a stereo? 100 amps is good for about 1400 watts of amp.

Its for my battery relocation..

esteinmaier · Post by **esteinmaier** » Thu Dec 15, 2011 5:51 am

Ah, OK. For that, I guess it's OK. I'm sorry I didn't read it all.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Thu Dec 15, 2011 8:51 am

esteinmaier wrote:Ah, OK. For that, I guess it's OK. I'm sorry I didn't read it all.

its cool buddy

now i just need an nhra killswitch setup

speed127 · Post by **speed127** » Wed Dec 21, 2011 5:11 pm

like the new rims... can't wait till you get them on

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Dec 21, 2011 10:11 pm

speed127 wrote:like the new rims... can't wait till you get them on

they wont be on until i can find a set of lug nuts that will actually work..

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Tue Feb 28, 2012 11:23 am

HUGE UPDATE!!

Well Most of you dont know, but i dropped out of the school i was going to, and now am currently working as a mechanic at a local dealership getting all my factory training, certifications, and licenses. Well being im working 50 hours a week and making way above minimum wage, i have some money to play with.. So it looks like its officially racecar/ daily driven neon time

The plans so far are :

Crower cams either stage 3 or 4
dohc head ( ported, milled, etc..)
ngc block
crower rods
arp rod bolts
9.2:1 eagle pistons
stock crank
amm dohc short runner box intake
unknown manifold ( probably agp or something similar )
non modular clutch
bfmic
all new piping
b woody crash bar
etc..

this is just the beginning of the list

-Cody

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Sun Apr 22, 2012 10:18 pm

Powdercoated radiator brackets, coil pack heat shield, valve cover, trans mount, fuel rail and other misc stuff

Custom mild steel skatter shield i made today

trans all cleaned up

Clutchmasters stage 4, non modular flywheel.

more updates to come tomorrow as i start to get her back together

RobsProjectSOHC · Post by **RobsProjectSOHC** » Sun Apr 22, 2012 10:46 pm

that engine bay looks clean......just mad clean work. good job man.

Trappy · Post by **Trappy** » Sun Apr 22, 2012 11:06 pm

Holy fuck dude!

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon Apr 23, 2012 7:18 am

RobsProjectSOHC wrote:that engine bay looks clean......just mad clean work. good job man.

thank you sir

Trappy wrote:Holy fuck dude!

is that a good or bad " holy fuck" Batman? lol

NeonNick925 · Post by **NeonNick925** » Mon Apr 23, 2012 7:51 am

Clean bay man. Kudos.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon Apr 23, 2012 6:21 pm

NeonNick925 wrote:Clean bay man. Kudos.

thanks, dude

mopar04 · Post by **mopar04** » Sun May 27, 2012 2:53 am

Any other pictures with the new rims?

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Sun May 27, 2012 10:45 am

mopar04 wrote:Any other pictures with the new rims?

i was actually going to update my log later on today

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Sun May 27, 2012 11:36 am

powdercoated some brackets

skatter shield done and on

Skatter shield powdercoated

Better pic of the new wheels

Interior shot

nhra battery setup all done ( wiring to the right of the box is the alternator wiring for the killswitch )

engine bay shot, tucked some more lines and wires and did a few other misc things

More to come once i quit being lazy. I also just installed 1600cc injectors. Those 577cc's were maxed out on 15 with 93.. I dont think they would have liked 20psi on 110 lol

-Cody

mopar04 · Post by **mopar04** » Sun May 27, 2012 1:48 pm

I have always enjoyed watching the progress on this car. new wheels look great.

r/tguy02 · Post by **r/tguy02** » Sun May 27, 2012 6:46 pm

engine bay is looking mighty clean cody

speed127 · Post by **speed127** » Sun May 27, 2012 7:05 pm

what you gona do with the back seat area? Looks naked... not saying I don't like seeing things naked LOL BUT sometimes it's just better when it's all covered up. Talking about your rear seats of course.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Sun May 27, 2012 9:08 pm

mopar04 wrote:I have always enjoyed watching the progress on this car. new wheels look great.

Thanks buddy

r/tguy02 wrote:engine bay is looking mighty clean cody

thank you sir, you'll be seeing it mighty soon at your house

speed127 wrote:what you gona do with the back seat area? Looks naked... not saying I don't like seeing things naked LOL BUT sometimes it's just better when it's all covered up. Talking about your rear seats of course.

dude, i made a rear seat delete about a year ago..

silverneontuner · Post by **silverneontuner** » Sun May 27, 2012 10:35 pm

nice 2gn !

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon May 28, 2012 10:00 am

silverneontuner wrote:nice 2gn !

thank you sir

speed127 · Post by **speed127** » Mon May 28, 2012 11:30 am

Guess I just never noticed it before. Kinda like it and don't like it at the same time..... It's clean which i like but not matching, or covering, the sides is turning me off. Have to really take a look at it this year in Carlisle.

2GN.ORG

xxwhiteneonxx's project log! because racecar!

Leave bumper stock, or cut it out like the picture on the last page?