xxwhiteneonxx's project log! because racecar!

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon May 28, 2012 3:41 pm

speed127 wrote:Guess I just never noticed it before. Kinda like it and don't like it at the same time..... It's clean which i like but not matching, or covering, the sides is turning me off. Have to really take a look at it this year in Carlisle.

it has the sides. This was when it was being test fit.. And it matches the interior perfect. This was taken from a shitty camera..

INVUJerry · Post by **INVUJerry** » Mon May 28, 2012 4:02 pm

Dibs on the head/cam when you swap to a DOHC head!

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon May 28, 2012 4:03 pm

INVUJerry wrote:Dibs on the head/cam when you swap to a DOHC head!

alright buddy

speed127 · Post by **speed127** » Mon May 28, 2012 8:41 pm

XxWhiteNeonxX wrote:
speed127 wrote:Guess I just never noticed it before. Kinda like it and don't like it at the same time..... It's clean which i like but not matching, or covering, the sides is turning me off. Have to really take a look at it this year in Carlisle.
it has the sides. This was when it was being test fit.. And it matches the interior perfect. This was taken from a shitty camera..

Pics??? or maybe I should just check back a few pages.....

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon May 28, 2012 9:43 pm

speed127 wrote:
XxWhiteNeonxX wrote:
speed127 wrote:Guess I just never noticed it before. Kinda like it and don't like it at the same time..... It's clean which i like but not matching, or covering, the sides is turning me off. Have to really take a look at it this year in Carlisle.
it has the sides. This was when it was being test fit.. And it matches the interior perfect. This was taken from a shitty camera..

Pics??? or maybe I should just check back a few pages.....

post: 1205
Page:41

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon Jun 04, 2012 9:58 pm

hm.....

RobsProjectSOHC · Post by **RobsProjectSOHC** » Mon Jun 04, 2012 10:30 pm

XxWhiteNeonxX wrote:hm.....

I was expecting stickers....but this is 10 times better, lol.

mopar04 · Post by **mopar04** » Mon Jun 04, 2012 11:03 pm

RobsProjectSOHC wrote:
XxWhiteNeonxX wrote:hm.....

I was expecting stickers....but this is 10 times better, lol.

x2

I am also thinking about brewing up something to delete the back seat. Just have not figured out quite yet what I am wanting to do.

As always.... Looking good.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Tue Jun 05, 2012 7:00 pm

thanks guys

cdewalt1985 · Post by **cdewalt1985** » Tue Jun 05, 2012 7:01 pm

looks good man, I cant do way with seats as need them for the family....lol

INVUJerry · Post by **INVUJerry** » Tue Jun 05, 2012 8:06 pm

If its mounted there at an NHRA track you're gonna need a fire jacket. I'd put it in the trunk behind your seat delete. They'll give you less crap about it.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Tue Jun 05, 2012 10:11 pm

INVUJerry wrote:If its mounted there at an NHRA track you're gonna need a fire jacket. I'd put it in the trunk behind your seat delete. They'll give you less crap about it.

yeah, its going in the spare tire well. I was going to put it up front but i decided not to.

r/tguy02 · Post by **r/tguy02** » Wed Jun 06, 2012 7:30 am

cody just loves nhra rules dontcha buddy?

dtjackten · Post by **dtjackten** » Wed Jun 06, 2012 11:45 am

how are you going to be spraying that on a stock block? hopefully only to spool the turbo faster at launch... or a ic sprayer?

r/tguy02 · Post by **r/tguy02** » Wed Jun 06, 2012 12:06 pm

dtjackten wrote:how are you going to be spraying that on a stock block? hopefully only to spool the turbo faster at launch... or a ic sprayer?

correct, hes the one i was asking you info for

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Jun 06, 2012 12:33 pm

r/tguy02 wrote:cody just loves nhra rules dontcha buddy?

dude so far everything ive done, ive done as per nhra regulations. Its a pain in the ass, but if thats what they want, thats what i gotta do lol.

dtjackten wrote:how are you going to be spraying that on a stock block? hopefully only to spool the turbo faster at launch... or a ic sprayer?

well for now im going to be spraying the intercooler. But later on, im going with a 35 shot into the cold side.

dtjackten · Post by **dtjackten** » Wed Jun 06, 2012 12:46 pm

sorry i was not on facebook last night cody...i passed out.. i should be on later though if you have any questions. if you have a full kit you should have almost all you need exept for the ring for the ic that you could always make yourself..

gtownv6 · Post by **gtownv6** » Wed Jun 06, 2012 1:23 pm

With that roll bar could you have kept the rear seat? or would it not have worked?

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Wed Jun 06, 2012 4:51 pm

dtjackten wrote: sorry i was not on facebook last night cody...i passed out.. i should be on later though if you have any questions. if you have a full kit you should have almost all you need exept for the ring for the ic that you could always make yourself..

Im peicing it together. right now, all i need to figure out is how to make my intercooler sprayer. I planned on using 1/4" brake line, bending it how i want it, and drilling 1/8" holes in it to " spray " the intercooler. problem is, i need to figure out how to adapt 1/4" brakel ine to 4an braded line.. Any ideas?

gtownv6 wrote:With that roll bar could you have kept the rear seat? or would it not have worked?

yeah, i could have kept it

gtownv6 · Post by **gtownv6** » Thu Jun 07, 2012 2:36 am

And someone still could've sat in it?

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Thu Jun 07, 2012 7:21 am

gtownv6 wrote:And someone still could've sat in it?

i wouldnt sugest it. But yes .

dtjackten · Post by **dtjackten** » Thu Jun 07, 2012 12:54 pm

if you are using brake line run 5/16 line. and then drill holes in it... after you make the loop have the threaded fittings (i am figuring your making one that is like 30-40inch premade peace) pointed tword one another then use a brass T for the size threads. thread it together to make the loop, the other end being NPT then add what ever fitting you will need to hook to your line....

hope that made some kinda sense...

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Sun Jun 17, 2012 9:27 pm

nitrous express Switch location:

few bay shots before carlisle

and for those of you who havnt seen, heres my custom trans mount i fabbed up.

Ic sprayer done. Not a bad 5$ investment..

trunk shot

oh, and the best part of the whole thing...

r/tguy02 · Post by **r/tguy02** » Sun Jun 17, 2012 9:42 pm

Looks great man!

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon Jun 18, 2012 10:50 am

r/tguy02 wrote:Looks great man!

thanks buddy

Youll be the first one to see at carlisle

dtjackten · Post by **dtjackten** » Mon Jun 18, 2012 11:11 am

sprayer looks good. that mount look simular to mine. i put my nitrous sol. on a plate but trimmed the bracket down so it looked cleaner.

nice work cody. wish i could make it to carlisle.

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Mon Jun 18, 2012 1:45 pm

dtjackten wrote:sprayer looks good. that mount look simular to mine. i put my nitrous sol. on a plate but trimmed the bracket down so it looked cleaner.

nice work cody. wish i could make it to carlisle.

nooooooo

you better come this year!

Leighvi424 · Post by **Leighvi424** » Thu Jun 21, 2012 9:09 pm

I'm still on the fence about going. Depends on what kind of bonus I see in the next two weeks

XxWhiteNeonxX · Post by **XxWhiteNeonxX** » Fri Jun 22, 2012 7:33 am

Leighvi424 wrote:I'm still on the fence about going. Depends on what kind of bonus I see in the next two weeks

dude just go. Camp out at the fairgrounds or just room with somebody up there and throw them some money. Thats what id do

Leighvi424 · Post by **Leighvi424** » Fri Jun 22, 2012 1:19 pm

well it all depends if i even have enough to get down there lol. i want to paint the beast soon and i need 495 dollars just for the base coat. but i can bet ill be the only neon thats this color:p

2GN.ORG

xxwhiteneonxx's project log! because racecar!

Leave bumper stock, or cut it out like the picture on the last page?