ebay manifold

neonjake27 · Post by **neonjake27** » Mon Jul 26, 2010 12:35 pm

ok so i put a dohc head on. i bought a 420a manifold off ebay bolted it on with a t3/t4 turbo but now my alternator is in the way? can i relocate it it? or has any one else ran into this problem?

MyNeonSaysHi · Post by **MyNeonSaysHi** » Mon Jul 26, 2010 12:51 pm

neonjake27 wrote:ok so i put a dohc head on. i bought a 420a manifold off ebay bolted it on with a t3/t4 turbo but now my alternator is in the way? can i relocate it it? or has any one else ran into this problem?

There is your problem.

esteinmaier · Post by **esteinmaier** » Mon Jul 26, 2010 3:14 pm

The 420a is not the same motor as the D4RE. They happen to have the same bolt pattern reversed, however. Therein lies your problem.

neonjake27 · Post by **neonjake27** » Mon Jul 26, 2010 4:00 pm

i might try an adaptor from t3 to t3 to push it towards the firewall a little away from the alternator.

gtxtreme19 · Post by **gtxtreme19** » Mon Jul 26, 2010 4:14 pm

Use a 2.4 alternator bracket to move the alt to the front side of the motor?

Fuzzyneon · Post by **Fuzzyneon** » Mon Jul 26, 2010 4:17 pm

gtxtreme19 wrote:Use a 2.4 alternator bracket to move the alt to the front side of the motor?

was thinking the same thing

DingoR/T04 · Post by **DingoR/T04** » Mon Jul 26, 2010 7:31 pm

What about selling that one and getting a srt4 manifold?

neontj · Post by **neontj** » Tue Sep 28, 2010 6:37 pm

just to say the stratus 2.0 or 2.4 front mount brackets can eaisly fit the neon platform quite well as i did on my 2.4 swap. just sayin.

neonjake27 · Post by **neonjake27** » Tue Sep 28, 2010 8:55 pm

cool yeah the t3 to t3 adaptor worked good

2GN.ORG

ebay manifold

ebay manifold

Re: ebay manifold