wheel spacers?

neon02 · Post by **neon02** » Mon Oct 04, 2010 11:24 pm

hey i tried seaching to see how wide of a spacer i could go with on a 02 sxt. also what do i need to no about these. have 17x7 akita rims 40 offset i believe

Ntyvirus1 · Post by **Ntyvirus1** » Mon Oct 04, 2010 11:27 pm

i think ur good with 5mm, might want longer studs for 10. not sure, dont quote me on that.

OB · Post by OB » Tue Oct 05, 2010 12:52 am

I've heard 5mm is max as well, without longer studs.

theTeejmiester · Post by **theTeejmiester** » Tue Oct 05, 2010 4:43 am

5mm is the norm with regualar studs although ( and don't go quoting me on this if you do it and die) 8mm is possible...

neon02 · Post by **neon02** » Tue Oct 05, 2010 12:00 pm

im confused i was looking on ebay i know its a bad site as far as parts but they have 38mm with what look like studs on them??http://cgi.ebay.com/ebaymotors/Dodge-Ne ... 20b4183c47

esfan · Post by **esfan** » Tue Oct 05, 2010 4:51 pm

I heard that if you can turn your lug nuts more than 6 1/2 round onto the stock studs then you will be ok but don't count on that. 5mm and under should be ok but 38mm is way to big. However I don't think those "nut-like" things are studs, you can search around this website, Eibach is making 10mm spacer coming with studs:
http://www.modernperformance.com/suspen ... 7_364.html

INVUJerry · Post by **INVUJerry** » Tue Oct 05, 2010 5:02 pm

Those spacers will push your wheels out way to far. I've used 10MM on stock studs, but it's not a good idea. Stick to 5-8MM, or get longer studs.

neon02 · Post by **neon02** » Tue Oct 05, 2010 7:32 pm

will the 10mm give me a decent stance though any pics of them on a neon? thanks for the help

esfan · Post by **esfan** » Tue Oct 05, 2010 11:34 pm

Unless you are extremely JDM style slamming and huge wheel lips, pushing the wheel too out will look terrible especially those 38mm ones.

neon02 · Post by **neon02** » Wed Oct 06, 2010 12:00 pm

so you just say not to get them then

Post by **racer12306** » Sat Oct 09, 2010 7:43 pm

My opinion is to get the right size wheels.

theTeejmiester · Post by **theTeejmiester** » Sun Oct 10, 2010 3:42 pm

esfan wrote:Unless you are extremely JDM style slamming and huge wheel lips, pushing the wheel too out will look terrible especially those 38mm ones.

yeah cause we all know JDM stylze iz da only ones slammed...