shifter cable adjustment

drsokol · Post by **drsokol** » Fri Oct 22, 2010 7:54 pm

is there a better way to adjust the shifter cable on the left of the shifter besides trial and error after installing booger bushings

blackie204 · Post by **blackie204** » Fri Oct 22, 2010 9:04 pm

hey! are you having hang up issues where sometimes it wont go into gear but then other times you have no problems at all? cause.... i redid my bushings and my shifter and... having massive problems

drsokol · Post by **drsokol** » Sat Oct 23, 2010 1:49 am

yea thats whats going on currently

JeffB#2 · Post by **JeffB#2** » Sat Oct 23, 2010 8:28 am

There is a spring in the trans that is supposed to help return the shifter to a "neutral" position. Problem is that it's not very strong. The later T-355 had a stiffer spring but no one is going to open up the trans just to change that one spring. Later model T-350s didn't have the casting on the trans to drop a 1/4" drill bit down to help with the alignment of the cross-over. All you can do is try to get the shifter to sit in a neutral position and centered the best you can, then tighten the screw on the cable under the shifter. There is no other way besides a little trial and error after that.

g_force58 · Post by **g_force58** » Sat Oct 23, 2010 11:18 am

Boy howdy! This was a real pita when I changed my bushings to boogers. As was said, you just have to keep trying. Mine still has probs occasionally.

2GN.ORG

shifter cable adjustment

shifter cable adjustment

shift cable adjustment