spacers

j-king · Post by **j-king** » Sat Dec 04, 2010 11:32 am

I want to give my neon a agressive look by puting some spacers on it.

what would be a good size spacer to go with and safe?

Adam G · Post by **Adam G** » Sat Dec 04, 2010 6:04 pm

i think like 3mm is the smallest and is also the widest you can go on stock lugs

SlvrACR · Post by **SlvrACR** » Sat Dec 04, 2010 6:08 pm

Im running 5mm on mine and still have plenty of threads.

DOSneons · Post by **DOSneons** » Sat Dec 04, 2010 7:19 pm

u got any pics of where the 5mm set ur wheels at

j-king · Post by **j-king** » Sat Dec 11, 2010 1:35 pm

DOSneons wrote:u got any pics of where the 5mm set ur wheels at

yeah can i see some pics

C1DoG · Post by **C1DoG** » Sat Dec 11, 2010 1:43 pm

I'm running 10mm spacers on my rear wheels and it sits about flush with the body.

DOSneons · Post by **DOSneons** » Tue Dec 14, 2010 9:53 pm

so is it 3, 5, or 10mm that u can use on the stock threads

C1DoG · Post by **C1DoG** » Wed Dec 15, 2010 7:28 am

My guess would be the 3mm that you can use for stock. With the 10mm spacers, I had to replace all the lug bolts with longer ones.

Post by **Canada** » Wed Dec 15, 2010 7:51 am

The best way to check, is to use an open ended lug nut and watch the number of threads you engage to see what's safe.

I feel comfortable using up to a 5mm spacer on stock lugs, but no more. 8mm or higher I absolutely recommend using extended lugs.

As to the OP's question, whats the offset on your wheels so we can determine how far out you should pull out your wheels.

gtxtreme19 · Post by **gtxtreme19** » Wed Dec 15, 2010 8:04 am

He's running srt-4 rims