Rear side markers

Questions about AMPs, headunits, speakers, subs, security systems, ect... Anything to do with audio or security, those questions all go here.
Post Reply
C1DoG
2GN Member
Posts: 1455
Joined: Thu Sep 09, 2010 11:50 am
Location: Pensacola, FL
Contact:
Contact C1DoG

Rear side markers

Post by C1DoG » Wed Dec 15, 2010 4:05 pm

I have looked in the how to and found nothing so I am asking here. Has anyone done the side marker turned blinker bit on the rear sides of 03 or newer neons? I am thinking of doing it.
Drove my neon until it was killed in a flood.
Image
Top
darthroush
2GN Member
Posts: 1637
Joined: Tue Jul 14, 2009 2:14 am
Location: People's Republic of Kalifornia

Post by darthroush » Wed Dec 15, 2010 5:29 pm

What part are you talking about exactly? There aren't any side markers on the rear of the car?
Top
C1DoG
2GN Member
Posts: 1455
Joined: Thu Sep 09, 2010 11:50 am
Location: Pensacola, FL
Contact:
Contact C1DoG

Post by C1DoG » Wed Dec 15, 2010 5:40 pm

Not on my SXT. I wanted to do something like I have in the front.
Drove my neon until it was killed in a flood.
Image
Top
User avatar
2005.Neon.SXT
2GN Member
Posts: 2177
Joined: Mon Feb 04, 2008 2:16 am
Location: Raleigh, NC

Post by 2005.Neon.SXT » Wed Dec 15, 2010 8:34 pm

C1DoG wrote:Has anyone done the side marker turned blinker bit on the rear sides of 03 or newer neons?
C1DoG wrote:Not on my SXT. I wanted to do something like I have in the front.
I'm confused...
darthroush wrote:What part are you talking about exactly? There aren't any side markers on the rear of the car?
:withstupid:
Image
Progress Log --- Life & Work > Car... :(
Top
ZeroChad
2009 Gold Contributor
Posts: 3165
Joined: Sat Sep 01, 2007 11:08 pm
Location: Austin, Tx
Contact:
Contact ZeroChad

Post by ZeroChad » Wed Dec 15, 2010 8:40 pm

I think he wants to add sidemarkers in the rear. Go for it man.
Old Neon Log | Feedback

2000 - Corvette Coupe
2002 - Neon SE Fully Built (scrapped)
Top
C1DoG
2GN Member
Posts: 1455
Joined: Thu Sep 09, 2010 11:50 am
Location: Pensacola, FL
Contact:
Contact C1DoG

Post by C1DoG » Wed Dec 15, 2010 8:55 pm

ZeroChad wrote:I think he wants to add sidemarkers in the rear. Go for it man.
Exactly... Now to figure out how to wire them up and what to use. Might go with an led type flush mounted.
Drove my neon until it was killed in a flood.
Image
Top
xbrandonx
2GN Member
Posts: 445
Joined: Sun Jan 10, 2010 6:35 pm
Location: Keswick, Canada

Post by xbrandonx » Wed Dec 15, 2010 9:15 pm

link them to your rear signals?
--Brandon
Image
Top
occasional demons
Junior Admin
Posts: 20064
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Dec 15, 2010 9:27 pm

http://www.delcity.net/store/Oval-10-Di ... 797811.a_1


Skip the grommets and flush mount them.

You would need to do a variation of the reverse blinker mod, to keep them from coming on with the brake lights.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
Top
C1DoG
2GN Member
Posts: 1455
Joined: Thu Sep 09, 2010 11:50 am
Location: Pensacola, FL
Contact:
Contact C1DoG

Post by C1DoG » Wed Dec 15, 2010 10:12 pm

Yeah I want them to do the same as the front. I have clear markers for the front.
Drove my neon until it was killed in a flood.
Image
Top
occasional demons
Junior Admin
Posts: 20064
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Wed Dec 15, 2010 10:18 pm

Basically, you need to tie into the front turn wiring at the MFS, and run the wires to the rear side markers, if you don't want to do the reverse light blinker mod. LED's shouldn't give you MFS switch/wiring headaches.

You could just use the red led in the clear marker to keep them clear front/rear. IDK if four 194 bulbs would melt the MFS, as they sometimes melt without mods.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
Top
Jenni
2GN Member
Posts: 2499
Joined: Tue Aug 23, 2005 1:33 pm
Location: Berlin, Germany

Post by Jenni » Wed Dec 15, 2010 11:01 pm

your rear sidemarkers are just a bend in the rear reflector.
and so they already blink...

Image


But - if you have the LED taillights: they have 2 extra side marker LEDs.
Top
occasional demons
Junior Admin
Posts: 20064
Joined: Thu May 03, 2007 12:14 pm
Location: Ashland Ohio

Post by occasional demons » Thu Dec 16, 2010 12:11 am

But he want's to add extras in the rear fascia, or quarter panel. I'm assuming fascia.
Bill
Probably shouldn't listen to anything your penis says, that guy's a dick.
Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
Too much time spent here is a sign of a bad case of Ownaneonvirus.

2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
Top
C1DoG
2GN Member
Posts: 1455
Joined: Thu Sep 09, 2010 11:50 am
Location: Pensacola, FL
Contact:
Contact C1DoG

Post by C1DoG » Thu Dec 16, 2010 8:08 am

occasional demons wrote:Basically, you need to tie into the front turn wiring at the MFS, and run the wires to the rear side markers, if you don't want to do the reverse light blinker mod. LED's shouldn't give you MFS switch/wiring headaches.

You could just use the red led in the clear marker to keep them clear front/rear. IDK if four 194 bulbs would melt the MFS, as they sometimes melt without mods.




Thank you for the idea... :D I don't want to mess with the rear lighting at all and that little tidbit will work. Make a template to cut out part of the section I need and then install clear markers in the side of the rear fascia also. :rockon:
Drove my neon until it was killed in a flood.
Image
Top
brandon mitchel
n00b
Posts: 9
Joined: Thu Sep 09, 2010 12:47 am

Re: Rear side markers

Post by brandon mitchel » Thu Jan 06, 2011 11:07 pm

C1DoG wrote:I have looked in the how to and found nothing so I am asking here. Has anyone done the side marker turned blinker bit on the rear sides of 03 or newer neons? I am thinking of doing it.
I haven't done it on my side marker. I want to have it on front not on the rear.
Top
darthroush
2GN Member
Posts: 1637
Joined: Tue Jul 14, 2009 2:14 am
Location: People's Republic of Kalifornia

Re: Rear side markers

Post by darthroush » Fri Jan 07, 2011 1:18 am

brandon mitchel wrote:
C1DoG wrote:I have looked in the how to and found nothing so I am asking here. Has anyone done the side marker turned blinker bit on the rear sides of 03 or newer neons? I am thinking of doing it.
I haven't done it on my side marker. I want to have it on front not on the rear.
Look in the FAQ section...
Top
Post Reply

Return to “Audio / Security / Electrical”