pinout for 02+ stereo connector?

Questions about AMPs, headunits, speakers, subs, security systems, ect... Anything to do with audio or security, those questions all go here.
Post Reply
User avatar
jonnymopar
Junior Admin
Posts: 3039
Joined: Sat Nov 19, 2005 7:49 pm
Location: Southeastern MA

pinout for 02+ stereo connector?

Post by jonnymopar » Mon Dec 12, 2005 6:29 pm

Does anybody have it? And I'm not talking about the color codes. I need to know what each pin on the unit itself does. I didn't want to have to tear into my car and figure it out by the harness, but if no one has it handy, I'll have to do that.
Image
Jon J.

2003 Neon SXT - new home, new owner. Thanks for everything, old friend.
1989 Daytona ES - 2.4L/A555 swapped

Official "I'm Going To Drive My Neon Until Jerry Buys It" Club Member #11

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Tue Dec 20, 2005 5:42 am

its a lil late to post this for you, but do you have the dual connectors?
1 black 7 way
1 gray 7 way

or do you have
1 white 22 way
1 black 10 way
1 natural 2 way....

Let me know and I'll post the pinouts....

User avatar
jonnymopar
Junior Admin
Posts: 3039
Joined: Sat Nov 19, 2005 7:49 pm
Location: Southeastern MA

Post by jonnymopar » Tue Dec 20, 2005 10:58 am

Mine is just one connector, plus the antenna. I thought all 02+ were like that? Maybe it's 03+ instead. My 03 Neon is the same as my brother's 04 Ram. I thought my mom's 02 Stratus was the same, but now I'm not sure.

It's not too late. It would be great to have. Thanks alot!
Image
Jon J.

2003 Neon SXT - new home, new owner. Thanks for everything, old friend.
1989 Daytona ES - 2.4L/A555 swapped

Official "I'm Going To Drive My Neon Until Jerry Buys It" Club Member #11

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Tue Dec 20, 2005 8:32 pm

Image

CAV CIRCUIT FUNCTION
1 M11 16PK/LB FUSED B(+)
2 F10 18YL/RD FUSED IGNITION SWITCH OUTPUT (RUN-ACC)
3 E2 20OR PANEL LAMPS DRIVER
4 - -
5 - -
6 - -
7 X54 20VT RIGHT FRONT SPEAKER (+)
8 X56 20DB/RD RIGHT FRONT SPEAKER (-)
9 X55 20BR/RD LEFT FRONT SPEAKER (-)
10 X53 20DG LEFT FRONT SPEAKER (+)
11 Z9 16BK GROUND
12 - -
13 - -
14 D25 20VT/YL PCI BUS
15 - -
16 - -
17 - -
18 X51 20BR/YL LEFT REAR SPEAKER (+)
19 X57 20BR/LB LEFT REAR SPEAKER (-)
20 X58 20DB/OR RIGHT REAR SPEAKER (-)
21 X52 20DB/WT RIGHT REAR SPEAKER (+)
22 - -

Just reverse it for the radio side....

User avatar
jonnymopar
Junior Admin
Posts: 3039
Joined: Sat Nov 19, 2005 7:49 pm
Location: Southeastern MA

Post by jonnymopar » Wed Dec 21, 2005 2:16 pm

KICK ASS. Thanks alot!
Image
Jon J.

2003 Neon SXT - new home, new owner. Thanks for everything, old friend.
1989 Daytona ES - 2.4L/A555 swapped

Official "I'm Going To Drive My Neon Until Jerry Buys It" Club Member #11

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Sat Dec 24, 2005 8:32 am

no problem.... :wink:

User avatar
Floyd
2GN Member
Posts: 744
Joined: Tue Jan 18, 2005 12:42 pm
Location: Cantonment, FL

Post by Floyd » Tue Dec 27, 2005 7:19 am

gotta love those FSM's :)
Image

User avatar
BlackRoseRacing
2009 Platinum Contributor
Posts: 12729
Joined: Sat Dec 25, 2004 8:58 am

Post by BlackRoseRacing » Tue Dec 27, 2005 7:30 pm

fsm's???

User avatar
dblsg
2GN Veteran
Posts: 10719
Joined: Fri Jun 03, 2005 3:20 am
Location: Aurora, IL
Contact:

Post by dblsg » Tue Nov 07, 2006 5:14 pm

bump it up

can i have the pinouts for the 00-02?
Image Sam-I-Am
Image
Official "I'm Going to Drive My Neon till it Dies" Club #000046
Diablo0 wrote: "eh... your opinion doesn't matter... I'm doing what I want..."

User avatar
dblsg
2GN Veteran
Posts: 10719
Joined: Fri Jun 03, 2005 3:20 am
Location: Aurora, IL
Contact:

Post by dblsg » Sat Nov 11, 2006 4:50 pm

bump bump bump
Image Sam-I-Am
Image
Official "I'm Going to Drive My Neon till it Dies" Club #000046
Diablo0 wrote: "eh... your opinion doesn't matter... I'm doing what I want..."

Post Reply

Return to “Audio / Security / Electrical”