JM Solid Shifter Cradle Bushings (Out of Stock)

Own your own shop and want to promote some of you services to us? Maybe you made a deal with a company that if enough people buy a certain product they'll give everyone a cheaper price. Let everyone know about it here.
racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

JM Solid Shifter Cradle Bushings (Out of Stock)

Post by racer12306 » Wed Mar 09, 2011 7:58 pm

Currently out of stock. I will post up when I have more, but I'm not sure when that will be.


As Jonny mentioned in his vendor thread, I will be the new supplier for the illustrious JonnyMopar Solid Shifter Cradle Bushings.

If you're not sure what these are, on a 2000-2005 5-speed Neon, the whole shifter assembly is bolted to the floor with 4 rubber grommets, so it's got a little bit of play. Even when you do a short throw shifter or Boogers, or both, that overall give is still there. The bushings that I've made will eliminate that last bit of play and all you'll have left is the small bit that is in the cables (which is unavoidable). You don't even have to take the shifter out of the car to replace these bushings. All you'll need to do is unbolt it.

Image
The Bushings

Image
Installed

I am also offering the bushings for the Hurst shifter. These are longer than the standard size and are used to lift the shifter base off of the floor. The Hurst shifter comes with a poly bushing that still has play in it. These will completely remove the play. You will still need to use the washer that comes with the Hurst shifter to clamp the shifter base down.

I do not have a picture of these, but hopefully someone will send me a pic of them installed.


Inventory

Current Inventory: 0


My goal is to maintain at least some inventory. I'll probably make up 10 sets at a time to minimize shipping time. If you send in an order and I am out of stock, I will send an email/PM with an estimate of when I will be able to make more.

Pricing
$15 per set including shipping to the continental USA and Canada (if you are in Europe, HI, AK or somewhere else in the world, please send me a PM for a price).

$30 per set including shipping for the Hurst bushings to the continental USA and Canada (again if you are elsewhere in the world please PM me for a price). This style will not be stocked due the low demand. If you would like these, send me a PM and I will let you know when I'll be able to make them.

I am also offering the ability to donate to your favorite forum with the purchase of these bushings. If you send $20 ($35 for the Hurst bushings) for a set of these bushings $8 will be donated to directly to 2GN.org.


Payment
I accept:
cash (in person)
check (item won't ship until cleared)
money order
paypal (racer12306 (at) gmail (dot) com)

PM for the address to send a check or MO.


Compatibility
*stock Neon
*stock SRT-4
*Mopar Performance
*Mopure
*Maddog series (all)
*B&M
*Fidanza
*various rod-only eBay shifters
*Hurst**



**Hurst compatibility requires the Hurst style bushings.


Installation Instructions
https://docs.google.com/document/d/1yxh ... y=CM-ojL0L


Testimonials
FTWNeon on JonnyMopar Bushings with a Maddog 72% wrote:These things work great! They removed so much slop in the shifter. I still have some as I still havn't gotten any boogers yet but it still feels so much better. It's alot more enjoyable doing a hard 1-2 shift. I love them!

Edits
3/14/2011: These will now be called JM Shifter Cradle Bushings. I want to keep their heritage but differentiate the ones that I'm making from the ones that Jonny made. They are virtually the exact same parts. I only made a couple of very minor changes.

4/5/2011: Price changed to $15 shipped

7/30/2011: Added info on the Hurst style bushings.
Last edited by racer12306 on Wed Oct 19, 2011 2:53 pm, edited 14 times in total.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
JeffM
2GN Member
Posts: 3588
Joined: Tue Nov 04, 2008 8:02 pm
Location: Vermont

Post by JeffM » Wed Mar 09, 2011 7:59 pm

=D> Yay Frank! I can't wait to install my test set!
Image

User avatar
sidepipe87
2009 Silver Contributor
Posts: 9491
Joined: Fri May 30, 2008 5:35 pm
Location: Pittsburgh, PA
Contact:

Post by sidepipe87 » Wed Mar 09, 2011 11:03 pm

Do you have the ones we already ordered or is Johnny sending those?
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Thu Mar 10, 2011 5:41 am

Any bushing that were ordered and paid for through Jon have been shipped per Jon's vendor thread.

He told me there were 3 or so people that did not make the deadline on his last batch. If you are one of those 3, I am planning to make a batch of them tomorrow. Someone already PM'd me about the only set that I currently have so they go to that member.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

Themaggots
2GN Member
Posts: 393
Joined: Fri Jan 11, 2008 3:12 pm
Location: Quebec, Canada

Post by Themaggots » Mon Mar 14, 2011 5:34 pm

Received my set. Can't install it, the car is still in storage
Jimmy

xbrandonx
2GN Member
Posts: 445
Joined: Sun Jan 10, 2010 6:35 pm
Location: Keswick, Canada

Post by xbrandonx » Mon Mar 14, 2011 9:27 pm

received mine as well, hopefully installed by the end of the week if weather stays warm
--Brandon
Image

User avatar
jonnymopar
Junior Admin
Posts: 3033
Joined: Sat Nov 19, 2005 7:49 pm
Location: Southeastern MA

Post by jonnymopar » Tue Mar 15, 2011 3:44 pm

Themaggots wrote:Received my set. Can't install it, the car is still in storage
xbrandonx wrote:received mine as well, hopefully installed by the end of the week if weather stays warm
Except for one set going to the United Kingdom, you guys were the furthest away, so I would guess that if you have your sets, everybody else in that last batch got them.

Kudos to Frank for taking over making these. Sad to see one of my pet projects go, but it's in good hands for sure.
Image
Jon J.

2003 Neon SXT - new home, new owner. Thanks for everything, old friend.
1989 Daytona ES - 2.4L/A555 swapped

Official "I'm Going To Drive My Neon Until Jerry Buys It" Club Member #11

User avatar
superdan
2011 Bronze Contributor
Posts: 2092
Joined: Fri May 30, 2008 5:16 pm
Location: Bridgeport, OH

Post by superdan » Tue Mar 15, 2011 4:01 pm

payment sent :)
03' Dodge Neon...SRT-4 swap
04' Dodge Dakota SLT 4x4

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Tue Mar 15, 2011 7:39 pm

superdan wrote:payment sent :)
In the envelope and ready to be mailed tomorrow.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
Canada
Junior Admin
Posts: 4816
Joined: Tue Jun 28, 2005 4:05 pm
Location: Island Grove, Ontario, Canada

Post by Canada » Wed Mar 16, 2011 9:10 am

I got my final two sets of the old JohnnyMopar ones yesterday!

Frank, when are you going to start making them out of titanium?

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Wed Mar 16, 2011 9:16 am

As soon as you buy me a bar of 1.25" titanium.

:D
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Wed Mar 16, 2011 9:25 am

Canada wrote:Frank, when are you going to start making them out of titanium?
:shock:


I would buy a set. Just cause.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Wed Mar 16, 2011 9:34 am

After looking up titanium prices:

One set of bushings would cost: ~$75

And I would need at least 5 orders with 100% deposits
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Wed Mar 16, 2011 9:59 am

Well poop :(
If I could just figure out how to meld the Outback and the Neon into one car...

Image

User avatar
JeffM
2GN Member
Posts: 3588
Joined: Tue Nov 04, 2008 8:02 pm
Location: Vermont

Post by JeffM » Wed Mar 16, 2011 11:16 am

When are you making my ivory ones, Frank? I got the diamond-encrusted gold ones but they're not rare enough.
Image

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Wed Mar 16, 2011 11:24 am

:rofl:
If I could just figure out how to meld the Outback and the Neon into one car...

Image

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Wed Mar 16, 2011 9:45 pm

You know you want the titanium.


I was half joking at first but in all seriousness, if there are 5 people that want a titanium set I'll give it a shot.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Thu Mar 17, 2011 8:27 am

I really do. It's kinda my thing, you know?

Maybe you could make a feeler post about it? :D
If I could just figure out how to meld the Outback and the Neon into one car...

Image

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Tue Apr 05, 2011 11:49 am

Looks like the feeler failed :lol:
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Tue Apr 05, 2011 12:16 pm

Pretty much :lol: I would have been shocked if anyone would have spoke up for a set.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

NickKo
2009 Gold Contributor
Posts: 2248
Joined: Sun Jun 11, 2006 11:24 am
Location: IL./WI.border

Post by NickKo » Tue Apr 05, 2011 9:44 pm

Think of the weight savings !! :D


- Nick
-1998 2-dr SOHC MTX= 57mm TB; Maddog STS
-2000 Ply.LX w/MTX = Maddog STS; CAI; 2.5 exh.; 60mm T/B
-2001 ATX w/Syked PCM + Magnum header
-2001 ACR w/SRT T/B bored out to 55mm

Official "I'm Going to Drive My Neon till it Dies" Club #000009

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Wed Apr 06, 2011 6:21 am

Since I wouldn't change the design at all, it would actually be heavier.

I don't know how to design for titanium so I wouldn't know where I could cut weight.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
gtxtreme19
2010 Silver Contributor
Posts: 2061
Joined: Tue Jan 26, 2010 3:02 pm
Location: 43554 NW ohio

Post by gtxtreme19 » Wed Apr 06, 2011 7:21 am

Well since I don't know anything about them yet.... will these fit a 95 coupe?
-Mike
Midnight_Rider wrote:
Skitlz wrote:Gramps, get a GPS.
Gramps Prefers Streetmaps. :D

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Wed Apr 06, 2011 7:55 am

My understanding is that they are not necessary on a 1GN because the shifter is already mounted right to the floor on those.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Thu Jun 09, 2011 12:35 am

Bump for a little update.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

racer12306
Junior Admin
Posts: 16015
Joined: Sun Oct 24, 2004 8:53 pm
Location: Baltimore, MD
Contact:

Post by racer12306 » Sat Jul 30, 2011 8:31 pm

bump for inventory update.
-Frank
Member of Spork Racing
Forum issues: racer12306@2gn.org
Forum Behavior
Support your favorite forum, DONATE!

User avatar
RobsProjectSOHC
2012 Gold Contributor
Posts: 415
Joined: Fri Aug 19, 2011 11:36 am
Location: NY

Post by RobsProjectSOHC » Thu Sep 01, 2011 7:28 pm

Where do i buy these?
Project 003. Just building a Daily Driver with some upgrades.
For Sale Thread | CarDomain | FeedBack
Official "I'm gonna drive my Neon until it dies Club" Member #119

User avatar
RobsProjectSOHC
2012 Gold Contributor
Posts: 415
Joined: Fri Aug 19, 2011 11:36 am
Location: NY

Post by RobsProjectSOHC » Sat Sep 03, 2011 9:04 pm

Anyone know?
Project 003. Just building a Daily Driver with some upgrades.
For Sale Thread | CarDomain | FeedBack
Official "I'm gonna drive my Neon until it dies Club" Member #119

Themaggots
2GN Member
Posts: 393
Joined: Fri Jan 11, 2008 3:12 pm
Location: Quebec, Canada

Post by Themaggots » Sun Sep 04, 2011 8:32 am

RobsProjectSOHC wrote:Anyone know?

Inventory

Current Inventory: 2 sets ready to ship.


My goal is to maintain at least some inventory. I'll probably make up 10 sets at a time to minimize shipping time. If you send in an order and I am out of stock, I will send an email/PM with an estimate of when I will be able to make more.

Pricing
$15 per set including shipping to the continental USA and Canada (if you are in Europe, HI, AK or somewhere else in the world, please send me a PM for a price).

$30 per set including shipping for the Hurst bushings to the continental USA and Canada (again if you are elsewhere in the world please PM me for a price). This style will not be stocked due the low demand. If you would like these, send me a PM and I will let you know when I'll be able to make them.

I am also offering the ability to donate to your favorite forum with the purchase of these bushings. If you send $20 ($35 for the Hurst bushings) for a set of these bushings $8 will be donated to directly to 2GN.org.


Payment
I accept:
cash (in person)
check (item won't ship until cleared)
money order
paypal (racer12306 (at) gmail (dot) com)


PM for the address to send a check or MO.
Jimmy

User avatar
DetergentCandy
2GN Member
Posts: 1197
Joined: Sun Sep 27, 2009 8:13 pm
Location: Phoenix

Post by DetergentCandy » Sun Sep 04, 2011 4:44 pm

Owned.
02 Neon R/T(Blackula) - Old and busted
05 SRT-4(Serenity) - Sold
20th Anniversary Golf GTI - Sold
05 SRT-4 - New hotness


LilSparkPlug wrote:Mmmm beefy :rofl:

Post Reply

Return to “Vendors / Group Buys”