Public Disturbance Project Log

Public Disturbance · Post by **Public Disturbance** » Sun Nov 06, 2011 5:57 pm

Ok guys now bear with me for now all the pics are done with my cell phone so not the best quality for now but it does the job now remember this is my dd so it gets dirty and has signs of ware and tear but here is a few to get started with.

Dont mind the stroller and you can see the back drivers door where a kid ran a go kart into me and insurance gave me a big

but otherwise got the flip flop trunk mod done with hood pins in the back bolt holes to stop trunk from having a gap in the back when closed.

Lame interior shot all I have to find to finish the black/slate grey in the front door panels I have the main part of the dash just havent had time to get it in wasnt too bad pulling the black one out so I will probally do a how to or something when I do it.

Shows my red and silver Public Disturbance logo. Public Disturbance is the name of the audio company Im working on opening just looking for a physical location have everything but that.

Picked up a silver HVAC piece out of the same one Neon I got the main dash part out of painted the knob inserts red and ordered a new overlay from blackcatcustoms.com for like 20 bucks that didnt have the blue tint I have 4mm red leds in place of the stock lights and added some extra leds also in red.

Red leds under the dash have them on both sides dont mind the mess like I said its my dd and I was working on tucking some wiring and tubing today.

MPx Shorty Antanna

So go ahead tell me what you guys think I just got done painting the valve cover(stock plastic)red and doing some tucking and clean up under the hood it was getting too dark for pics. Iam looking for a Magnum VC that I can cut and make about a inch taller for enough clearance for the crane 20 I have sitting in storage.

More to come on that at a later time.

EDIT: Just so you guys know this is by no means a fast paced build just doing a little here and a little there as I can, thought it would be cool to have this so when its all said and done I can look back at it and see the time span it progressed.

Public Disturbance · Post by **Public Disturbance** » Sun Nov 13, 2011 3:24 pm

Public Disturbance · Post by **Public Disturbance** » Sun Nov 20, 2011 3:27 pm

Engine
2.0L NGC(Block powdercoated black,+.020",9.2:1 pistons)
Magnum Head Converison(Port and Polish)
Magnum Valve Cover(Powder coated Inferno Red)<---Still needs powdercoated
Indy Intake
MPx 60mm Throtle Body
Crane 16 Cam
AEM TruTime Cam Gear
AC/PS Delete
Spitting Demon Coil and Wires
Dog Bone Solid Motor Mounts
MTX Swap(3.55 Tranny, Aluminum Flywheel, Non Modular Clutch)
Maddog Short Shifter(Booger Bushings)
ASP BW Bullseye Power Unit B259 Turbo Setup(Batmowheel option)
2.5" Polished Intercooler Hardpipes
Turbo XS RFL BOV
SRT4 Godspeed Intercooler
Tial 38mm Wastegate(Dump Tube)
Megasquirt M1v3(87 tune while NA, E85 tune when boosted)
Mild Wire Tuck
Aeromotive A1000 fuel pump and filter
Aeromotive A1000 fuel pressure regulator(58psi+1psi per pound of boost)
SRT4 Boomba Fuel Rail with return fuel setup
1200cc injectors
16 gallon narrow fuel cell(mounted under car, feed threw stock gas tank door)
Skid Plate for Fuel Cell
Shuriken Battery
Mechman 270amp Alternator
0ga Grounding Kit

Exterior
Viper Style Body Kit
Z3 Fenders
Carbon Fiber SRT4 Style Hood
Carbon Fiber Trunk
Carbon Fiber SRT4 Spoiler
Carbon Fiber B-Pillar Covers
Carbon Fiber C-Pillar Covers
Carbon Fiber Roof Vortex
Carbon Fiber Gas Tank Door
Black LED Style Taillights
Black Projector Headlights
Halo Fog lights
5500K HID Headlights
5500K HID Foglights
Fresh PX8 Black Paint Job (Red Flake, After Body Kit install)
MPx Shorty Antanna
Red LED Underglow(Not everyone cup of tea but I like them)
Tinted Windows (5% all the way around, 20% over whole windshield with 5% brow)

Interior
Dark Slate Grey Interior Swap
Red LED underdash lighting
Red HVAC Lighting
Carbon Fiber C-Pillars
Carbon Fiber Upper and Lower B-Pillars(Shaved Seatbelt bolts)
Carbon Fiber A-Pillars(Drivers Side Triple Pod)
Carbon Fiber HVAC Double Din(Blaze Red heater control surround)
Carbon Fiber Door Sills
Carbon Fiber Arm Rest
Harness Belt Bar(Powdercoated blaze red)
Sparco Naxos Steering Wheel
Sparco Racing Seats
Back Seat Redone to match fronts
Black Cat Customs face plate (blaze red with silver lettering)
Red LED Cluster Lighting

Suspension/Breaks/Wheels and Tires
17x7.5 Motegi Rims
215/40/17 Toyo Tires
Megan Coilovers
Mopar Front and Rear Strut Bars(Ends blaze red)
SRT4 Rear Break Swap(Calipers blaze red)
KSport Big Break Setup Front(Calipers blaze red)
KSport Hydraulic EBrake
27mm Front Sway Bar
24mm Rear Sway Bar
Poly Urathane Bushing

Ice
Pioneer AVH-P4300 Double Din
2- 12" Kicker L7s
Kicker ZX2500.1
Kicker KS 6x9s Rear
Kicker KS 6.5 Front
Kicker ZX350.4 Amp
10" Flip Down Monitor

Sad thing is its all on hold for now because of this....

INVUJerry · Post by **INVUJerry** » Sun Nov 20, 2011 4:25 pm

I thought you were going 2.2 stroker with a dohc head?

I say do a 2.4 DOHC swap. If you do an SRT swap it'd be great to be able to use the SRT trans, since it will hold up to high HP levels more.

Unless you go to a built ATX.

Public Disturbance · Post by **Public Disturbance** » Sun Nov 20, 2011 11:59 pm

INVUJerry wrote:I thought you were going 2.2 stroker with a dohc head?

I say do a 2.4 DOHC swap. If you do an SRT swap it'd be great to be able to use the SRT trans, since it will hold up to high HP levels more.

Unless you go to a built ATX.

I'm not 100% on drive train the only way I would do a srt swap is if I find a whole car that way I have a lot of the stuff I'm wanting like my rear breaks, cluster, and like you said the th850 so find me a donar car and I will lol

2003se559 · Post by **2003se559** » Tue Nov 22, 2011 6:07 pm

got any pics of the subs? and amp?

FAC3L3SS · Post by **FAC3L3SS** » Tue Nov 22, 2011 6:45 pm

Sticker gotsa go.

Public Disturbance · Post by **Public Disturbance** » Wed Nov 23, 2011 3:58 pm

2003se559 wrote:got any pics of the subs? and amp?

I can get some amp took a crap so waiting for new one to come in went with the 2011 model 2500.1 to replace my 2008 model

FAC3L3SS wrote:Sticker gotsa go.

No sir

Public Disturbance · Post by **Public Disturbance** » Sat Dec 10, 2011 1:25 am

Started getting my double din in will post pics as soon its finished

D-Railed_Neon · Post by **D-Railed_Neon** » Sat Dec 10, 2011 10:21 pm

You weren't kidding about the dash. I literally have the exact same set up with slate top cover and end caps, but taupe dash and door panels. I feel your pain bro. lol But Its coming together nicely man +1

Public Disturbance · Post by **Public Disturbance** » Fri Dec 30, 2011 12:58 am

Yeah I have my rear door panels in but still looking for fronts finally found a dash but need to get it in need a day off that's warmer then 25 lol. Anyways got my double din in and the hvac surround fitted for it ordered some carbon fiber to wrap it. Also got my blue LEDs in my cluster needed to ask you how you got your odometer blue D-Railed?

Don't know why everyone had problems with blue LEDs being too dark I love mine

Double din a shows the blue HVAC LEDs still working on the control cover and still need to pull my red under dash lights and get blue ones once I get the hvac wrapped in carbon fiber I will take a day time pic

Also got bored and made some random stickers, stole this idea from another member but I like it

D-Railed_Neon · Post by **D-Railed_Neon** » Sat Dec 31, 2011 4:53 pm

I forget the name of it but I used a blue cellophane I picked up at some hobby store. good luck man

Public Disturbance · Post by **Public Disturbance** » Sun Jan 08, 2012 3:05 am

Ok so here is the double din in the day not the prettiest thing but I ordered some carbon fiber fabric to wrap it not the do noc stuff the real deal

Then tonight I got the itch to do something so I came up with the idea to mold in a gauge pod in one side of the heater vent here it is need to pic up some body filler to fill it in better and smooth everything out before I wrap it

Also ordered the stuff to change the blue lighting to red idk the blue just isn't me

srtjesse · Post by **srtjesse** » Sun Jan 08, 2012 3:32 pm

nice build i have the main dash part you need in slate gray let me know if you wanna work something out for it

Public Disturbance · Post by **Public Disturbance** » Sun Jan 08, 2012 7:27 pm

srtjesse wrote:nice build i have the main dash part you need in slate gray let me know if you wanna work something out for it

Oh I already have that it's front door panels I'm looking for all the one I have found are for power windows and I'm still interest in that bottom end we talked about just waiting for taxes

srtjesse · Post by **srtjesse** » Sun Jan 08, 2012 8:09 pm

Sweet just let me know

Public Disturbance · Post by **Public Disturbance** » Mon Jan 09, 2012 1:11 am

So finished up the hvac surround for my double din sprayed it a flat black until my carbon fiber comes in to wrap it also ordered a auto meter es vac/boost gauge today from autozone today also here is what it looks like right now

Public Disturbance · Post by **Public Disturbance** » Wed Jan 11, 2012 9:46 pm

Ok so my red LEDs came in from superbrightleds.com and all I can say is I'm less then pleased with the customer service this go around. I ordered 3 even says it on the invoice 3 4mm red LEDs for the hvac and they only shipped 2, I think ok well I will call them in the morning then I go to put in the gauge cluster 5 led wide angle LEDs and I get two in the third one I go to install had no LEDs on it it's just a empty plastic shell again no big deal I was just going to call them. So I called them on my way to work today and this is what I got "Sir we wouldn't make mistakes like that" followed by a big CLICK so now I have to order more stuff from them to finish my red lighting. Anyways what I did get in looks good it is a little dark but it's only because of the blue/green film on the cluster stock next thing that I'm going to order is a custom gauge face and hvac from blackcatcustoms.com in blaze red with silver numbering with a red film to make it brighter. Still not too happy with superbrightleds though

Public Disturbance · Post by **Public Disturbance** » Fri Jan 13, 2012 12:22 pm

Ok so I cleaned the engine bay a little and put my stock air box back on before we get any more snow just as a precaution never realized how bad I need to shorten my 0 ga grounds though the ones on the pass. side are only 4 ga and they look fine by the ones on the battery are 0 ga and they have way too much slack

Also what is the best way to loop the power steering when I take the pump out this driving with the pump in line sucks

Public Disturbance · Post by **Public Disturbance** » Mon Jan 30, 2012 4:18 am

This is just a stock cluster with red LEDs reason its a little green on the right side is a couple of the leds I got were bad so two of the six lights in the cluster are just stock bulbs going to order a custom faceplate soon

Public Disturbance · Post by **Public Disturbance** » Thu Feb 02, 2012 12:17 am

RIMS!!!! 17x7.5 +35 Now I just need to get some coilovers because it looks like Im going to go offroading.

Before Bath

After Bath, has a nice shine to it getting my windows tinted soon

sxxxt · Post by **sxxxt** » Thu Feb 02, 2012 6:46 am

Wheels look good.. I'm probably not the biggest fan of those type of wheels but they work well with ur car... Lower and tint and would look A ok until wink wink.. Lol keep the log ago going... Me updates on the bezel?

2low4uneon · Post by **2low4uneon** » Thu Feb 02, 2012 12:20 pm

Looks good now u need to lower it : )

Public Disturbance · Post by **Public Disturbance** » Thu Feb 02, 2012 8:36 pm

sxxxt wrote:Wheels look good.. I'm probably not the biggest fan of those type of wheels but they work well with ur car... Lower and tint and would look A ok until wink wink.. Lol keep the log ago going... Me updates on the bezel?

Yep thinking I will have to bring the wife drive out and get a smaller U-Haul to come back with or do install there and trash my stock stuff since its not really in the best shape

2low4uneon wrote:Looks good now u need to lower it : )

Yep looking at getting some Megan coilovers soon but there is a little something I wanna get done first so I know just how low I can go

D-Railed_Neon · Post by **D-Railed_Neon** » Fri Feb 03, 2012 4:25 pm

Coming along nicely, bro

but we need MOAR PICS!!

k-b-s-neon02 · Post by **k-b-s-neon02** » Fri Feb 03, 2012 7:11 pm

Looks good bro

Public Disturbance · Post by **Public Disturbance** » Fri Feb 03, 2012 11:14 pm

D-Railed_Neon wrote:Coming along nicely, bro but we need MOAR PICS!!

k-b-s-neon02 wrote:Looks good bro

Thanks guys I did my first tint job today 5% all the way around with 20% over the whole windshield with a 5% brow came out pretty good for my first tint job!

After a good bath and claybar treatment

INVUJerry · Post by **INVUJerry** » Sat Feb 04, 2012 7:25 am

Don't like the rims and I think tinting the windshield is extremely dangerous.

Danteneon · Post by **Danteneon** » Sat Feb 04, 2012 9:34 am

Where do you live that you think you can get away with that tint?

I'll admit, I love the mono-black look, but I'm sure the cops won't. And like Jerry said, not feeling the wheels. They just don't flow with the car.

Drop it, get some cleaner wheels, and you will be set. Good luck with the tint.

Public Disturbance · Post by **Public Disturbance** » Sat Feb 04, 2012 1:46 pm

In South Dakota the tint law is 15% in the back 20% in the front will a 11% leeway so the back I can get away with and cop dont really mess with tint or vinyls here because they have to have a tint meter in order to issue a ticket and my next door neighbor is a highway patrol officer and he said that he called for a officer with a tint meter and there were only 2 in the state and they were both in Souix Falls which is 6 hours away from Rapid I mean if I get hassled for it Im not going to argue and be a dick with the officer but until then Im going to rock it.

With the wheel I cant get a good shot of them. They look a lot better in person they are black powdercoated with a machined face but the face kind of gives the rims a optical effect that throws them off.