YAY new Valve Covers.

ChrisRT · Post by **ChrisRT** » Mon Feb 13, 2006 10:18 am

FTWNeon wrote:
Floyd wrote:i called and they said 8.93 a pop.
Good lord those are expensive! 35.72 for all 4

Oh well my old ones are fine
Call around to a couple of dealers if there are more then one in your area. I called three different dealers and got three different prices.

Here's my red installed.

That looks really hot! I think I'll order one for my 01 R/T.

Is that fuel injector cover avaible from the dealer? If so, could you give me a part number, and a round about price? Mine was missing when i bought the car, so i popped on the 2k injector cover i had laying around.

I've got Mopar Performance wires tho, wonder how that'll contrast with the red. *oh well*

FTWNeon · Post by **FTWNeon** » Mon Feb 13, 2006 12:14 pm

I got mine a couple of months ago. Thats about what it should be.
4891410AB - ECH engine - $18.50list

ChrisRT · Post by **ChrisRT** » Mon Feb 13, 2006 1:41 pm

Sweet, thanks!

neonjoe · Post by **neonjoe** » Mon Feb 13, 2006 6:34 pm

CrucialNeon wrote:holy crap its joe, man where have you been homo

lurking but its winter so its hibernation time...

my valve cover came in without all the goodies
Dealership prices
PCV valve was 10 bucks, spark plug seals were 8 ea nd the gasket was 13 bucks canadian, oh oil cap was 1.75 LOL thats 8 bucks cheaper than the stock looking one at partsource.

BlackRoseRacing · Post by **BlackRoseRacing** » Wed Feb 15, 2006 8:26 pm

dawm
My personal opionion, looks good and clean except I change a few things:

1- Get the powder coated red color valve cover....
2 - Get rid of the air tool water seperator on your intake
3 - Do something with the airbox, CAI...DIY CAI...ex..ex...

Its definately one of the better looking engines if seen for a mostly stock underhood car......

dawm · Post by **dawm** » Wed Feb 15, 2006 8:48 pm

BlackRoseRacing wrote:dawm
My personal opionion, looks good and clean except I change a few things:

1- Get the powder coated red color valve cover....
2 - Get rid of the air tool water seperator on your intake
3 - Do something with the airbox, CAI...DIY CAI...ex..ex...

Its definately one of the better looking intakes if seen for a mostly stock underhood car......

1) i have one in a box in the other room
2) it came with the car i havent replaced it
3) i have a iceman and a LFS 60mm tb..

i said that was an old picture =P

quicksilvr · Post by **quicksilvr** » Wed Feb 15, 2006 9:33 pm

Here's my brothers new one.

scneonchic · Post by **scneonchic** » Wed Feb 15, 2006 10:26 pm

that yellow looks really nice...I must be the only one that got silver

I wish I could pull off the other colors on mine

quicksilvr · Post by **quicksilvr** » Wed Feb 15, 2006 11:58 pm

I could have done silver with my car, and it would have looked real nice, but I had already painted mine myself, and I liked the red enough to keep it. Your's does look nice

scneonchic · Post by **scneonchic** » Thu Feb 16, 2006 12:12 am

thanks

I think it looks nice too...jus seems sort of "bland" compared to the red/yellow/blue...but im happy with it. the red looks good w/ silver though, or even the yellow would look good w/ your calipers

quicksilvr · Post by **quicksilvr** » Thu Feb 16, 2006 12:29 am

I thought about that too, doing yellow. But, I decided that red was better under the hood, and my (few) interior accents are red also. Like little red LED shot lights that I have mounted to the center console shooting across the floor, and my *future* amp has a red decorative bar light, and I MIGHT do red and black seats. Maybe. Probably not.

I just really like the Sparco seats that you can build your own of, done in black and red.... http://www.sparcostitched.com/?referrer=sparcousa.com

I did the calipers yellow way back when, because I loved the look of a silver Porsche with yellow brakes.

Knoxville_R/T · Post by **Knoxville_R/T** » Wed Mar 15, 2006 11:41 pm

Here are some pics of mine installed.

Sorry it took so long to get them.

MyNeonSaysHi · Post by **MyNeonSaysHi** » Wed Mar 15, 2006 11:43 pm

^^^Pretty! Now get that red injen fuse box cover on!

FTWNeon · Post by **FTWNeon** » Wed Mar 15, 2006 11:45 pm

Looks alot like my engine bay...

Knoxville_R/T · Post by **Knoxville_R/T** » Wed Mar 15, 2006 11:48 pm

raul-01 wrote:^^^Pretty! Now get that red injen fuse box cover on!

I got polished to match the tb and CAI

FTWNeon · Post by **FTWNeon** » Wed Mar 15, 2006 11:51 pm

Knoxville_R/T wrote:
raul-01 wrote:^^^Pretty! Now get that red injen fuse box cover on!
I got polished to match the tb and CIA

Ack! The Feds! Run!!!!

Knoxville_R/T · Post by **Knoxville_R/T** » Thu Mar 16, 2006 12:01 am

kc2005ptgt · Post by **kc2005ptgt** » Thu Mar 16, 2006 1:59 am

You put CIA instead of CAI (Central Intel Agency instead of Cold Air Intake)

Knoxville_R/T · Post by **Knoxville_R/T** » Thu Mar 16, 2006 7:10 am

oh lol

did not see that

Project Draven · Post by **Project Draven** » Fri Mar 17, 2006 12:42 pm

I got a silver one! Your not alone Jacqueline!

caustic neon · Post by **caustic neon** » Fri Mar 17, 2006 12:48 pm

that silver one looks nice. but i got a red one to go with my mag head swap. i orderd a mag fuel injector cover today?

scneonchic · Post by **scneonchic** » Fri Mar 17, 2006 12:49 pm

Your silver one looks nice, Draven!

I might actually be selling mine soon or getting it redone for the other car, if my other VC comes out nice from the paint shop

Project Draven · Post by **Project Draven** » Fri Mar 17, 2006 12:55 pm

I ordered a polished fuse box cover from injen!
Cant beat that deal for 20 bucks shipped!
I think it wil add some nice touch. I need to find a polished AEM like my old one.
I sold the polished one, and then bought a silver one that looked pretty ugly!
So I rattled it black!
Anyone got a 2.0 16valve injector cover they wanna sell me??