Couple ?s

Public Disturbance · Post by **Public Disturbance** » Fri Jan 06, 2012 1:41 am

First one is someone tried to break into the neon and messed up the window trim that goes under the windows and meets the door and my uncles yard has a neon that they look new on what is the easy and proper way to take them off

Second where can you get clear corners

Midnight_Rider · Post by **Midnight_Rider** » Fri Jan 06, 2012 4:37 am

If you're referring to the black plastic belt moulding, you might want to check this thread:

viewtopic.php?t=46972&highlight=

FAC3L3SS · Post by **FAC3L3SS** » Fri Jan 06, 2012 2:07 pm

Also, eBay.

Public Disturbance · Post by **Public Disturbance** » Fri Jan 13, 2012 4:16 pm

Ok now that I found clear corners how in the hell do you get the stock ones out I just spent the last 45 trying and nothing

Danteneon · Post by **Danteneon** » Fri Jan 13, 2012 4:42 pm

There is a clip on the back of the lamp that has to be removed. First, remove the socket from the lamp (1/4 turn and pull out). Feel the backside of the lamp. You will find a metal lip on the rearward side of the lamp. Pull it toward the rear of the car. Push the lamp out from the back of the bumper. Reverse process to install.

Post by **occasional demons** » Fri Jan 13, 2012 5:47 pm

You can get it from underneath, or pull the headlight out. Just don't twist off the headlight bolts. If they do break loose/come out, now would be the time to antiseize the crap out of those bolt threads.