02 Neon R/T-aka-"Opie" (Project Log)

Do you have a project going or will you be starting a project here very soon and just want to keep a log of everything you and when? Share with everyone every step of the way what sort of progress you are making on your project.
Post Reply
NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

02 Neon R/T-aka-"Opie" (Project Log)

Post by NitroHeadz » Mon Feb 13, 2012 8:25 pm

Hey there everyone, I figured I would start the project log for my R/T.

I have had it for almost a month now and have just been kicking around ideas, the Car will not be on the road until the 1st week of June so I have some time to do what I would like....

So far my plans are to try and collect some parts....the parts that I already have are as follows

-Dodge Grille
-Projector (Halo) HL's
-03 Rear Bumper w/MOPAR Lip
-03 OE TL's
-*extra* R/T Front Bumper
-*extra* R/T Side Skirts

I plan on collecting these parts before May

-Fog Light Cases
-OE Hood
-Pads
-Rotors
-16"-17" Rims
-Booger Shifter Bushings
-Poly Engine Mount Bushing Inserts
-Plugs
-Wires
-CAI

Once the car is on the road I'll be changing the Timing belt and hunting someone down that can re-paint my car it's factory color..

Here's some recent pictures of the R/T (after I cleaned it & fixed the Sunroof, lol)

Image
Image
Image
Image
Image

I hope these pictures aren't too big...
Last edited by NitroHeadz on Sun Mar 11, 2012 3:13 am, edited 1 time in total.
"Our Lady of Blessed Acceleration, don't fail me now."

User avatar
LowNSlow
Moderator
Posts: 5016
Joined: Wed May 12, 2004 12:45 am
Location: Houston TX
Contact:

Post by LowNSlow » Mon Feb 13, 2012 10:35 pm

Nice list and projected list.

The car looks good. I like that leather interior :)
-John


Image

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Post by NitroHeadz » Tue Feb 14, 2012 1:45 am

LowNSlow wrote:Nice list and projected list.

The car looks good. I like that leather interior :)

Thank you,

There was a few things that sold me on this car and the interior was for sure one of them, I'm looking to keep the inside stock, the already painted HVAC piece is actually a slightly different "red" then the body so other than re-painting the HVAC the body color I think I will be leaving it stock.....I think it looks good Original too.

To be honest the outside is going to be pretty much the same thing, my "end point" would look like this....(I don't have that kind of software so you're going to have to imagine it, lol :thumbup: )


-Factory red
-Mildly lowered (on 16"-17", Charcoal in shade & 5- Spoke)
-Dodge Grille
-03 Rear
-mopar lip
-Depot LED tails
-Projector (Halo's)
-CF OE Hood
-CF OE Trunk Lid (no wing)
-Mild window tint
-Shaved Badges
-Calipers cleaned and painted, Charcoal
-Drilled and or Slotted Rotors
-Anything I didn't mention (exterior wise) is staying Stock

And of course some small (but somewhat accumulative) Engine Mod's....

Thanks for looking!!
"Our Lady of Blessed Acceleration, don't fail me now."

User avatar
heyybaker
2GN Member
Posts: 239
Joined: Tue Feb 14, 2012 9:43 pm
Location: Hagerstown, MD
Contact:

Post by heyybaker » Fri Feb 17, 2012 5:10 pm

Hey, nice car :)! Exterior and interior look great. Can't wait to see progress!
Image
2001 NEON R/T
Project Polish -- INCOMPLETE

User avatar
Danteneon
Former Moderator
Posts: 9591
Joined: Thu Dec 20, 2007 5:13 pm
Location: Manassas, VA

Post by Danteneon » Fri Feb 17, 2012 5:53 pm

Reading over your list of future mods made me remember Andrew's old car...

Image
Image
Image
Image
Image

Not the same in all areas of course, but it came to mind.
If I could just figure out how to meld the Outback and the Neon into one car...

Image

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Post by NitroHeadz » Sun Feb 19, 2012 5:52 pm

Danteneon wrote:Reading over your list of future mods made me remember Andrew's old car...

Not the same in all areas of course, but it came to mind.
Yeah, pretty close to what I'm planning....those all Red Tail Lights on Andrew's car are SWEET!

Reminds me of the Wolfsburg Tail Lights...very cool!
"Our Lady of Blessed Acceleration, don't fail me now."

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Here's an update for ya, lol

Post by NitroHeadz » Sat Mar 17, 2012 9:58 pm

Thought one of these might be fun so........

Image
Image

It's being uninstalled from a 2005 SRT-4, absolutely everything needed to Drop this into my 2002 R/T is being included.....


"Today was a good day.."

More to come :twisted:
"Our Lady of Blessed Acceleration, don't fail me now."

User avatar
MyNeonSaysHi
2GN Veteran
Posts: 11898
Joined: Mon May 23, 2005 8:46 pm
Location: Kansas

Post by MyNeonSaysHi » Sun Mar 18, 2012 1:59 am

Hell yeah!!!
Ready to double your horsepower and torque?

08 Acura TL-S
05 Neon SRT-4

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Post by NitroHeadz » Sun Mar 18, 2012 5:20 am

MyNeonSaysHi wrote:Hell yeah!!!
Ready to double your horsepower and torque?

Shit yeah, but I'm not completely home free yet I still have to pick up a PT Clutch,Oil Pump Seal,Timing Belt Kit,Intake Tubing,Cam Cover Gasket & maybe a Water Pump.....and then I still have to wait until June before I can drive it :crybaby:
"Our Lady of Blessed Acceleration, don't fail me now."

User avatar
MyNeonSaysHi
2GN Veteran
Posts: 11898
Joined: Mon May 23, 2005 8:46 pm
Location: Kansas

Post by MyNeonSaysHi » Sun Mar 18, 2012 11:26 am

Not cool!

08 Acura TL-S
05 Neon SRT-4

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Post by NitroHeadz » Sun Mar 18, 2012 2:20 pm

MyNeonSaysHi wrote:Not cool!
I know, lol


It`s a strange feeling to be both happy and sad at the same time, lol
"Our Lady of Blessed Acceleration, don't fail me now."

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Post by NitroHeadz » Tue Mar 20, 2012 3:01 pm

Here's some small stuff I did yesterday just because it was nice out....

-Installed Dodge Grille
-Installed Projectors

I have yet to post a picture of the current Power Plant so..
Image

Lights & Grille
Image
Image


Afterwards I gave her a rinse, I really gotta get another Hood :(
Image


More on the way.....thanks for checking in!
"Our Lady of Blessed Acceleration, don't fail me now."

honda_zman
2GN Member
Posts: 154
Joined: Thu May 19, 2011 12:09 pm
Location: West Branch, Michigan

Post by honda_zman » Tue Mar 20, 2012 3:06 pm

I need to get a set of skirts too
Image
01 neon low and slow
98 civic turbo'd sohc 11psi

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Post by NitroHeadz » Wed Apr 11, 2012 2:36 pm

So I've been running around finding Parts to get this Car ready to roll, the SRT Engine is going up North this Weekend and the Car should be following it shortly after....I had a list of stuff to get and I'm almost done collecting.

Quick list and a picture of what I've been collecting...

-Gates Timing Belt
-Water Pump Kit
-Head Bolts
-Rotors (Front & Rear)
-Pads (Front & Rear)
-Top End Gasket Kit

Image

I still have to get...

-Engine Oil
-Transmission Fluid
-Oil Filter
-Spark Plugs
-Radiator Fluid

Swap is coming up soon and that is when the bulk of the Pictures will be taken, so stay tuned :rockon:

Thanks for watching!
"Our Lady of Blessed Acceleration, don't fail me now."

NitroHeadz
n00b
Posts: 17
Joined: Fri Oct 14, 2011 2:40 am

Like a Boss

Post by NitroHeadz » Wed Apr 18, 2012 3:51 pm

And with a Canadian attitude & determination, the Engine is Transported North to get ready for the instal......all due thanks to "Boosted97" for coming down and Transporting (dude is a mad man!)

Image


Yes.............just like that.....lol
"Our Lady of Blessed Acceleration, don't fail me now."

Post Reply

Return to “Progress/Project Log”