DEPO Projectors Adjustment? (Highbeams)

lilolneon · Post by **lilolneon** » Mon Mar 05, 2012 9:59 pm

Picked up a set of DEPO projectors from egay for cheaper than modern performance (sorry, but money saved is money saved!)

I got them installed and have been trying to adjust them. I have the projectors themselves pretty well aligned, but when it comes to the high beams, the driver side is higher than the passenger side.

Is there a certain way to adjust the high beams?

(Yes, I have searched the forums and read what I can on projectors and adjusting them.)

I noticed each bulb housing for the H4 bulbs has a rubber cover on the back, is that something I can just pull out/put in to change the bulbs? (and possibly adjust the lights if that is where it is?)

I know about the bottle cap screw for the projectors themselves, those are fine, its the high beams I have trouble with.

Dont like driving with wonky headlights that look like

They are the 03-05 lights by the way.

Any help would be appreciated!

alsey_seven · Post by **alsey_seven** » Mon Mar 05, 2012 11:48 pm

depo projectors only have the bottle cap screw. i also have a set, but bought them from modern

ZeroChad · Post by **ZeroChad** » Mon Mar 05, 2012 11:49 pm

I think the high beams just have left to right adjustment.

lilolneon · Post by **lilolneon** » Tue Mar 06, 2012 2:28 am

Are yalls high beams level with one another? Or a little off as well?

lilolneon · Post by **lilolneon** » Wed Mar 07, 2012 2:38 pm

As it turns out, my driveway is not as flat as I thought it was. >.> So the lights are level lol.