Wiring Diagram

superdan · Post by **superdan** » Wed Mar 07, 2012 7:29 pm

When I did my swap some of the wires were broken on the passenger side of the engine bay harness and on the drivers side of the same harness. I soldered the wires on the passenger side back together which was easy because all I had to do was match the colors up. The wires that were broken on the drivers side were all black with the yellow tracer which are the side marker and turn signal wires. Got those all matched up and soldered together and the parking lights works, turn signals work, and the head lights come on. When I flick the high beams on the head lights just go completely off

I guess I need the wiring diagram for the drivers side head lights and possibly a diagram for the MFS. Unless someone can point me in the right direction as to why my head lights turn off when I switch the high beams on.

sidepipe87 · Post by **sidepipe87** » Wed Mar 07, 2012 9:33 pm

Check the fuses too

Post by **occasional demons** » Wed Mar 07, 2012 9:49 pm

you haz PM.

superdan · Post by **superdan** » Wed Mar 07, 2012 9:59 pm

Ryan- That was the first thing I did was check the fuses. I will double check them tomorrow but I am fairly certain none of them are blown.

Bill- PM replied