driver side door stuck in lock position help!!!!

thisdieingdream1 · Post by **thisdieingdream1** » Wed Apr 04, 2012 8:53 pm

my door lock on the drivers side front wasn't locking or unlocking with the push of the electronic switch. So I took it out and assembled it. Put it back together and tried it and it worked!

It was missing a bolt so I put one in..

I put it back in the door and all. And it locked and unlocked. Great!!!!!

Then I tried to open it....from the inside...nothing...won't open. Tried from the outside nothing.... Tried the key and still nothing... So now my drivers side door is permantly stuck shut in lock position ...

How do you fix this????

PS..... I GOT PISSED AND WELL... HAX SAW PLUS HAMMER PLUS DRILL. =S LOCKING MECHANISM IN PIECES BUT STILL IN DOOR WITH DOOR SHUT.

(4-4-12, I now know I'm no mechanic)

stdlystdmufn · Post by **stdlystdmufn** » Wed Apr 04, 2012 9:22 pm

ummm do you remember all of the little rods that were connected by little plastic pieces? i bet those are some of the pieces. are these what some of the pieces look like?

EDIT

thisdieingdream1 wrote:
PS..... I GOT PISSED AND WELL... HAX SAW PLUS HAMMER PLUS DRILL. =S LOCKING MECHANISM IN PIECES BUT STILL IN DOOR WITH DOOR SHUT.

(4-4-12, I now know I'm no mechanic)

good rule of thumb is if you have to use a hammer youre doing it wrong and you should stop and google how to...(obviously somethings on cars really do require the use of a good hammer but stuff in the doors don't)

thisdieingdream1 · Post by **thisdieingdream1** » Wed Apr 04, 2012 10:29 pm

Yeah I know the pieces your talking about. But I completely ripped apart the balck gear box and motor inside. Its all messed up. Idk what to do

stdlystdmufn · Post by **stdlystdmufn** » Wed Apr 04, 2012 10:35 pm

sounds like youre gonna have to buy a new one

thisdieingdream1 · Post by **thisdieingdream1** » Wed Apr 04, 2012 10:52 pm