srt4 wing bolt broke off..fixable?
-
hodgesdodges
- 2GN Member
- Posts: 29
- Joined: Sun Aug 29, 2010 1:07 am
- Location: Washington Indiana 47501
srt4 wing bolt broke off..fixable?
Found a srt4 wing for sale on craigslist but says it has a bolt broke off..is it reparable? He only wants $20 for it..
Silver 2000 SOHC MTX bone stock...for now..
-
NyNeon0813
- 2GN Member
- Posts: 727
- Joined: Thu Nov 17, 2011 11:53 am
- Location: ny
-
silverneontuner
- 2GN Member
- Posts: 754
- Joined: Tue Sep 25, 2007 9:15 pm
-
Midnight_Rider
- 2014 Platinum Contributor
- Posts: 8457
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Indianapolis, IN
-
occasional demons
- Junior Admin
- Posts: 20067
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
If you can get the broke off part out of the wing, you can install a new stud into it, providing you can obtain the correct stud. I believe they just thread into the wing. If the wing itself is tore up, you could try setting a bolt in there, and filling it with good epoxy, and letting it set up. Just be darn sure the bolt is in the right position...
Bill
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
Probably shouldn't listen to anything your penis says, that guy's a dick.
Too much time spent here is a sign of a bad case of Ownaneonvirus.Patience, of course, is a very powerful weapon, but sometimes I start to regret that it is not a firearm.
2000 Neon MTX swap with '02 R/T PCM
1999 neon coupe 2.4 swap
-
VampOfVegas
- 2GN Member
- Posts: 211
- Joined: Wed Jan 10, 2007 3:35 pm
- Location: Las Vegas, NV
Is the stud/bolt cracked in half still attached to the spoiler? Or is it broken out of the wing itself w/ nothing attached?

http://www.ByVampDesign.com USE CODE "2gn" for FREE SHIPPING OVER $25 only available in the cont. US
1 - drill hole in remaining section of bolt still in wing.
2 - use tap and die set to thread drill hole. be sure to thread hole with reverse threads.
3 - screw small bolt of matching thread into the new "screwhole."
4 - once tight, keep going this removes the broken bolt.
5 - Do celebration dance because you are smarter than the guy who didn't know to do this and sold you this wing for $20
2 - use tap and die set to thread drill hole. be sure to thread hole with reverse threads.
3 - screw small bolt of matching thread into the new "screwhole."
4 - once tight, keep going this removes the broken bolt.
5 - Do celebration dance because you are smarter than the guy who didn't know to do this and sold you this wing for $20
BOBNEON2K
2K Hunter Green ES MTX
2K Hunter Green ES MTX


