magnum header install

half_twisted · Post by **half_twisted** » Sun Jan 29, 2006 3:35 am

i just got my magnum header in and wanted to install it this saturday but as i was getting into it and started to unbolt my stock header i noticed that it had the o2 sensore bolted on the side of the header. then i started to go back in my head to the moments i was admiring my new header and didnt remember seeing a bung for the o2 sensore. pulled out the mag header and i was right. now what do i do. im stuck with a mag header, hopes and dreams. a friend sd that since i had two o2 sensore i could do fine with out one. i dont think so...
can i just bolt it on and bolt the o2 sensore right after the mag header..

i need some help pls.

dblsg · Post by **dblsg** » Sun Jan 29, 2006 4:08 am

as long as one is before the cat and one after the cat, you should be good to go.

tamadrumr88 · Post by **tamadrumr88** » Sun Jan 29, 2006 10:18 am

if you need to plug it.... hit up an exhaust shop as they should be able to provide something to close up that hole if need be

UMKCNeon04 · Post by **UMKCNeon04** » Sun Jan 29, 2006 1:06 pm

for the mag header, they had there first bung bung on the downpipe before the cat and the 2nd one right after the cat on the same pipe. just take it to an exhaust shop and have them weld in an 02 bung at the collector for about 50bucks.

dawm · Post by **dawm** » Sun Jan 29, 2006 2:32 pm

50 is too much, ive had 2 bungs welded in different pipes and was charged $25-$30..

and correct the mag header has no 02 bung. they are in the mag downpipe (catpipe) 1 before the cat and 1 after the cat.

UMKCNeon04 · Post by **UMKCNeon04** » Sun Jan 29, 2006 7:06 pm

i wasnt sure on price. the one i bought had a bung already in it. so even better now that its cheaper.

half_twisted · Post by **half_twisted** » Mon Jan 30, 2006 12:42 am

well what i might end up doing is bolting on the mag header and have a shop weld a bung on the down pipe right after the mag header and before the cat.

Sparky828 · Post by **Sparky828** » Tue Feb 07, 2006 8:40 am

hey... how did this header install go... is the stock downpipe long enough to work perfectly with the mag header? ive heard rumors that the mag downpipe is a tad shorter then the stock one...

ilpadrino · Post by **ilpadrino** » Tue Feb 07, 2006 9:36 am

dawm wrote:50 is too much, ive had 2 bungs welded in different pipes and was charged $25-$30..

Price reflects where you are. It might be more expensive where he's from. I know for SURE that it's way expensive over here. You don't even wanna know the prices I was given lol.

UMKCNeon04 · Post by **UMKCNeon04** » Tue Feb 07, 2006 10:43 am

Sparky828 wrote:hey... how did this header install go... is the stock downpipe long enough to work perfectly with the mag header? ive heard rumors that the mag downpipe is a tad shorter then the stock one...

my mag header worked perfect with the stock downpipe.

and ya, i wasnt the one to have the bung welded in so like i said, it could be off. ive been known to misquote numbers. sounded high to me also.lol

half_twisted · Post by **half_twisted** » Wed Feb 08, 2006 11:33 pm

i havent had a chance to gt it in so when i do ill keep u posted. migh thave it done this week or maybe nevt week