questions [changed title from box sizes]

Anonymous User · Post by **Anonymous User** » Mon Feb 06, 2006 12:26 am

what sized boxes is everyone running and how many subs. i want to fit inbetween the wheelwells, underneath the seatbelt brakets.

KoRwIn69 · Post by **KoRwIn69** » Mon Feb 06, 2006 3:29 pm

Mine is a bit too big at around 26 inches wide, 16 inches tall and 14 inches deep... the top of the box touches the middle seatbelt brackets.

Loud-e-nuf · Post by **Loud-e-nuf** » Tue Feb 07, 2006 2:14 pm

I believe mine is about 28"wide x 14" tall x 8" deep (approx 1.25cuft) plenty of space for a single ported 12"
________
Herbalaire Review
________
OREGON MEDICAL MARIJUANA

arodier007 · Post by **arodier007** » Wed Feb 08, 2006 2:19 pm

I have my 2 12" fit very snug in the back with some useable space for the groceries
http://community.webshots.com/photo/202 ... 9942tAvbZA

http://community.webshots.com/photo/202 ... 9942uzezvo

http://community.webshots.com/photo/202 ... 9942WPCAvP

http://community.webshots.com/photo/202 ... 9942hdKfcN

Anonymous User · Post by **Anonymous User** » Wed Feb 08, 2006 8:55 pm

arodier007 : can you please get me the measurments of your box? thank you.

dblsg · Post by **dblsg** » Thu Feb 09, 2006 2:30 am

enough room to clear the seat belts...

Floyd · Post by **Floyd** » Thu Feb 09, 2006 7:14 am

mine is 2 cubic feet. i think it was something like: 26x14x15.75 Just one 12" Kicker CompVR

Anonymous User · Post by **Anonymous User** » Sat Feb 11, 2006 12:52 am

dblsg : what is the measurements on that box, i might be picking up a bandpass box for 2 12s tomorrow for $25. please help me out. i dont want to waste gas to meet up with the person and it not fit.

Anonymous User · Post by **Anonymous User** » Sat Feb 11, 2006 1:59 am

im going to be picking up this box tomorrow for $25. heres its measurements, im pretty sure it would be able to fit in the trunk space between the wheel wells.

31"W x 15.5"H x 17.5"D

dblsg · Post by **dblsg** » Sat Feb 11, 2006 2:17 am

too tall.... you might be able to squeeze it in, but i doubt it.

mine is 15'' high and i had to get rid of the plastic cover on the seat belt.
32'' wide, and i still have about 1 1/2" on each side of space.
10" deep at the top
14" deep at the base

Anonymous User · Post by **Anonymous User** » Sat Feb 11, 2006 3:35 am

damn, i measured it in my trunk and the middle seat belt bracket was at or around to 15.5 but im going to remeasure it when its sunny out.

Anonymous User · Post by **Anonymous User** » Sat Feb 11, 2006 8:42 pm

i picked up my subs today and my amp and wiring kit......

arodier007 · Post by **arodier007** » Sun Feb 12, 2006 6:56 am

The dimension of my box are provided via link
NOTE: I bought these for $250.00 from a guy going back to the USA and they wouln't let him ship them in his vehicle (not OEM) They are very tight and acualy I have them under powered with a 600w Sony Amp.
http://www.autohifi.net/shop2/p550.html

Anonymous User · Post by **Anonymous User** » Mon Feb 13, 2006 1:56 am

going to be picking up this box in the next week or so for $30. the pexiglass is kinda messed up, but it will do for now. measurements are (W-31.5 x H-15.5 x D-15)

the most i will spend on this system to date.

Jenni · Post by **Jenni** » Mon Feb 13, 2006 3:39 am

Wow - a 28"-bear for your Neon? You're so crazy...

Anonymous User · Post by **Anonymous User** » Tue Feb 14, 2006 10:58 pm

might not pick up the bandpass box, might pick up a sealed box instead now.

Anonymous User · Post by **Anonymous User** » Fri Feb 17, 2006 12:03 am

would this be a good installation kit to use? i was planning on using my friends cousins tools but hes quite busy and i dont want to bother him.

http://www.cardomain.com/item/SCOTK12V

dblsg · Post by **dblsg** » Fri Feb 17, 2006 10:33 am

i don't think that kit is necesary... your main power source must be brought all the way from the battery and the remote wire can be hooked up to the fuse box (radio fuse). so there is really no need for the voltmeter.

Anonymous User · Post by **Anonymous User** » Fri Feb 17, 2006 7:07 pm

already got the box now, got it for $30 picked up from the audio place.

now i just need to get some crimpers and a wire stripper. i accidently left my tool box open and it rusted all my tools.....yup im a dumbass for that.

neonlight18 · Post by **neonlight18** » Mon Apr 10, 2006 9:21 am

never heard of earthquake before, how do they sound???

lilolneon · Post by **lilolneon** » Mon Apr 10, 2006 10:23 am

right now i have a big ol box i got from car-toys... for i think $80, fits two 12's and is sealed... But one of my current projects is making custom fiberglass enclosures to go inbetween each rear wheel well and tail lights... im going to be working on them some more today with adding a layer of the fiberglass, and cutting the wood mount ring... so... it should take some shape today

jkeith82 · Post by **jkeith82** » Sun Apr 16, 2006 12:34 am

I just built this box at my dads shop. my dads countertop shop has boards of mdf and i just go in after hours and build boxes for my friends. its great to have that resourse

Anonymous User · Post by **Anonymous User** » Mon Apr 24, 2006 1:18 am

neonlight18 wrote:never heard of earthquake before, how do they sound???

sorry for the late reply, but i cant even answer yet, since i need to buy more gold plated terminals for my ground wires.

dblsg · Post by **dblsg** » Mon Apr 24, 2006 2:38 am

dude..... WTF!!! will you hurry up already, geez

Anonymous User · Post by **Anonymous User** » Mon Apr 24, 2006 10:00 am

dblsg wrote:dude..... WTF!!! will you hurry up already, geez

hey hey now..i have to go and buy me more 4guage gold plated terminals and i have to find where my hammer is so i can crimp them. atleast i ran all my wires already and the box is already in the trunk with the amp mounted.

Anonymous User · Post by **Anonymous User** » Tue May 16, 2006 2:05 am

hate to say it but my system is now being sold hopefully....$250 for my amp and $120 for my subs and box. basically making $70 more than what i paid.

now ***possibly*** picking up...
Hifonics Brutus bx1500d amp
Resonant Engineering HC12 sub
3.2 c^ft box tuned to 32hz
Alpine CDA-7893 HU [ free ]
Pioneer 6.5 inch speakers [ free ]
dynamat extreme [ free ]
4gauge wiring kit [ free ]

all for about $400

2GN.ORG

questions [changed title from box sizes]

questions [changed title from box sizes]

boxes

2- 12"

Reply from earlier post above