Just bought Neon R/T 2003. Blinkers don't work, but hazard warning lights work, i.e. bulbs and wiring are OK. Multi-function switch is OK, checked it on another NEON LX. Found that 10A fuse No.1 in a fuse box was burnt, so I replaced it. It is responsible for blinkers and power mirrors. Power mirrors don't work as well by the way. Don't see anything else on the wiring diagram in blinkers circuit. Everything should be OK now, but it's not. I'm going to check the fuse box itself in the morning.
Any suggestions, what might cause blinkers and power mirrors not to work?
Blinkers don't work, but hazard warning lights work.
Blinkers don't work, but hazard warning lights work.
2002 Neon LX (ATX) & 2003 Neon R/T
- sidepipe87
- 2009 Silver Contributor
- Posts: 9491
- Joined: Fri May 30, 2008 5:35 pm
- Location: Pittsburgh, PA
- Contact:
obviously something on the circuit is screwed up if your fuse is blowing. sounds like you have a short somewhere
PM me for your 03+ PCM SKIM/VIN flashing needs. Neon PCMs Plus