eDead liquid sound deadener install

Praesepe559 · Post by **Praesepe559** » Thu Feb 23, 2006 11:41 pm

step one of my audio project, liquid deadener from elemental designs. this stuff kicks ass.. easy to put on and so far has made a huge difference in road noise/rattles from the rear of the car. as you can see in the pictures, i covered everything my brush could reach. total of 5 coats

overkill is my goal.. 1.5 gallons in the trunk/rear deck and 2 cans of 3x expanding foam

before:

after:

silentneon01 · Post by **silentneon01** » Fri Feb 24, 2006 12:02 am

whats the price on that stuff??

Praesepe559 · Post by **Praesepe559** » Fri Feb 24, 2006 12:29 am

retail is $50 a gallon from http://www.elementaldesigns.com

silentneon01 · Post by **silentneon01** » Fri Feb 24, 2006 12:54 am

how was clean up? and removal from an area you didn't want done?

Praesepe559 · Post by **Praesepe559** » Fri Feb 24, 2006 2:14 am

if you get it on something you didnt want to, you can just wipe it off if its still wet. If you get it on glass or exterior paint, and dont notice until its dry, it can be picked off, then just use some kind of cleaner. It washes off skin with a little soap and water and scrubbing, same with the paint brushes. This stuff is made to be easy to work with. Its pretty thick so its pretty easy to paint even upside down, and it dries to the touch to be recoated in 2-3 hours depending on temperature, and its fully dry within a day.

silentneon01 · Post by **silentneon01** » Fri Feb 24, 2006 8:36 am

thanks for the info.

J-Villa · Post by **J-Villa** » Fri Feb 24, 2006 8:40 am

adding weight to a heavy car...ahhh! lol

03sxt · Post by **03sxt** » Fri Feb 24, 2006 10:08 am

E3EsXt02 wrote:adding weight to a heavy car...ahhh! lol

He's not going for speed so it's okay.

The install looks nice! Definitely looks a lot easier than Dynomat and the other roll on sound deadener shit.

Praesepe559 · Post by **Praesepe559** » Fri Feb 24, 2006 6:31 pm

E3EsXt02 wrote:adding weight to a heavy car...ahhh! lol

lol true.. then again a gallon of this stuff (minus the can) weighs about 4lbs.. so 1.5 gallons = 6lbs, subtract the weight of the spare tire which i took out, so i actually got rid of some weight

of course.. as soon as i get all my equipment in there it will be a different story

scneonchic · Post by **scneonchic** » Fri Feb 24, 2006 7:00 pm

looks good!! wish I wouldve had some of that when I did my install, but its got some type of deadening so its okay

Praesepe559 · Post by **Praesepe559** » Fri Feb 24, 2006 10:28 pm

started the doors today

one coat in the door, one on the frame, and its already sounding more solid when you tap on it from the outside.. cant wait to get it all done.

deep1ca · Post by **deep1ca** » Mon Jul 09, 2007 1:45 am

This stuff is $50US for a gallon on the american elemental designs website and $100CAD on the canadian website. :

loko498 · Post by **loko498** » Wed Jul 11, 2007 7:43 pm

What a huge bump from the past. You brought this back 2 life a yaer and a half later.
Is anyone still using this stuff or is there a better brush on sound deadener stuff being used for a realistic price.

kornholio788 · Post by **kornholio788** » Wed Jul 11, 2007 9:16 pm

i personally use i think it is called peel n seel. IDK but it is supposed to be used for roofing. I got my back deck covered in it and it stopped some rattles. IM gunna do the entire car one day when i feel like it. The whole floor all the doors, roof, trunk with double layers lol. IDK it will give me something to do lol

Craz1000 · Post by **Craz1000** » Wed Jul 11, 2007 10:28 pm

very interesting, i would like to see how that stuff stacks up agenst dynamat. actually it kinda looks like rhino-lining, looks good though