stock srt-4 rear sway

speedracer · Post by **speedracer** » Sat Mar 04, 2006 6:47 pm

How thick is the stock srt-4 rear sway bar?

dawm · Post by **dawm** » Sat Mar 04, 2006 7:14 pm

speedracer · Post by **speedracer** » Sat Mar 04, 2006 8:16 pm

Damn, is that all. Thanks.

Post by **Diablo0** » Sat Mar 04, 2006 9:02 pm

Yup.. that'd be all. R/T is 19MM

dawm · Post by **dawm** » Sat Mar 04, 2006 9:05 pm

uhh R/T is 16mm, the ACR (magnum) is 19mm

Post by **Diablo0** » Sat Mar 04, 2006 9:29 pm

According to the FAQ on neons.org but then how come the ACR and R/T swaybar parts numbers are the same?

4656855AA

Thank you come again

tamadrumr88 · Post by **tamadrumr88** » Sat Mar 04, 2006 10:50 pm

yeah i forget where someone just posted that INCORRECTLY on this site (which says right on the homepage, "to stop the spread of misinformation about the second generation Neon")

anyway, ive already measured, the R/T is 19mm as is the ACR, not 16mm like mentioned

Wisher2 · Post by **Wisher2** » Sun Mar 05, 2006 2:07 am

I believe the R/T-ACR 1 gen is 16 mm

dawm · Post by **dawm** » Sun Mar 05, 2006 12:20 pm

diablo is correct, i checked the pn#'s ACR and R/T have the same rear sway @ 19mm.. ill talk to sllywhtboy about updating the .org faq