late acceleration

Paralyzer · Post by **Paralyzer** » Thu Mar 16, 2006 10:27 pm

ok here is the deal. I don't know if this falls under loose gas pedal or what but it is annoying. I can be driving down the road and want to pass and car....so I push down on the pedal and it does the following:

push down.......(pause)........then revs up and goes and revs really high and then when it changes gears my belt squeals....

WTF is going on with my car. Someone please help me!

Anonymous User · Post by **Anonymous User** » Thu Mar 16, 2006 10:34 pm

i noticed my neon would have a slight pause when i floor it, then it would start accelerating. a way to correct it is to buy a 60mm TB.

Post by **Canada** » Thu Mar 16, 2006 10:39 pm

Auto or Standard?

Paralyzer · Post by **Paralyzer** » Thu Mar 16, 2006 10:39 pm

J-Villa · Post by **J-Villa** » Fri Mar 17, 2006 12:51 am

sounds like the tranny is slipping...

half_twisted · Post by **half_twisted** » Fri Mar 17, 2006 1:56 am

E3EsXt02 wrote:sounds like the tranny is slipping...

if that was the case he should be able to feel the tranny disengage for a sec or two. kinda like when u put it in neutral while driving.. from what he wrote sounds like a belt is loose so get that fixed first to start narrowing it down.

Paralyzer · Post by **Paralyzer** » Fri Mar 17, 2006 9:40 am

ok I will do that. I have thought about just going ahead and getting an underdrive pully for it and new belt anyhow.

caustic neon · Post by **caustic neon** » Fri Mar 17, 2006 9:52 am

have they figured out a way to not throw a code with a udp on the 03's and up yet? that is the only thing holding me back on getting a udp.

rice_eater · Post by **rice_eater** » Fri Mar 17, 2006 10:17 am

i think that's tipical auto tranny pownage...we used to have an auto cirrus v6 and it would have a pause for 1-2 seconds every time to hit the gas. autos suck

Paralyzer · Post by **Paralyzer** » Fri Mar 17, 2006 10:29 am

I thought I read a post where they did find a way. I can't remember if it was this forum or SRTforums where I saw it. I will research it again for you.

blazesxt · Post by **blazesxt** » Fri Mar 17, 2006 11:05 am

i have never thrown a code on my 04 I have the MPx UDP...

Post by **racer12306** » Fri Mar 17, 2006 11:57 am

im with rice_eater on this one. you have to give the computer a sec to think. i wouldnt worry about it unless it just started doing it and it never has before. if that is the case check out the dealer and ask them whats up.

i thought it was only the 02 r/ts that had the cel problem with udp's

Floyd · Post by **Floyd** » Fri Mar 17, 2006 12:25 pm

blazesxt wrote:i have never thrown a code on my 04 I have the MPx UDP...

my 04 has had the MPx for about a year now with no issues...

caustic neon · Post by **caustic neon** » Fri Mar 17, 2006 12:44 pm

ok then looks like thats the next thing im ordering.

kc2005ptgt · Post by **kc2005ptgt** » Sat Mar 18, 2006 12:06 am

caustic neon wrote:have they figured out a way to not throw a code with a udp on the 03's and up yet? that is the only thing holding me back on getting a udp.

02 r/t and ACR throw the misfire codes.

racer12306 wrote:i thought it was only the 02 r/ts that had the cel problem with udp's

what he said.