Dyno'd today....

ChrisRT · Post by **ChrisRT** » Sun Mar 26, 2006 7:24 pm

I had my 17 inch, Enkei RS-6's on. It was a cool day today, around 40*'s or so, humidity was a little high, as it was sprinkling on and off.

Anyways, 3rd gear pull, netted 128whp/123wtrq. The only mod was an E-bay cool air intake.

Not really close to where I thought it would be.(I thought around 135whp) But, I was reminded that I was using 17 inch rims, and it does detract from the power a little.

Anyways, I might take it to the track in a couple of weeks, after I get the MPx underdrive pulley, and Thermal axle-back installed. Hopefully, I can crack 90mph in the quarter with it.

neon12sec · Post by **neon12sec** » Mon Mar 27, 2006 12:15 am

hopefully i hit 90's completly stock. Good luck

tamadrumr88 · Post by **tamadrumr88** » Mon Mar 27, 2006 2:52 pm

i hit 84 in my r/t

dont be so optimistic unless you have an acr

ChrisRT · Post by **ChrisRT** » Mon Mar 27, 2006 3:19 pm

tamadrumr88 wrote:i hit 84 in my r/t dont be so optimistic unless you have an acr

My friends bone stock R/T, hit 90+ at the track when he first had it.

We've got a "good" track down here.

J-Villa · Post by **J-Villa** » Mon Mar 27, 2006 3:44 pm

tamadrumr88 wrote:i hit 84 in my r/t dont be so optimistic unless you have an acr

haha i hit 89 in the 1/4

kc2005ptgt · Post by **kc2005ptgt** » Mon Mar 27, 2006 5:52 pm

tamadrumr88 wrote:i hit 84 in my r/t dont be so optimistic unless you have an acr

Me's liken the wayz yoo thinkin, boy

J-Villa · Post by **J-Villa** » Mon Mar 27, 2006 11:14 pm

y i hit 89 in the 1/4 on a non r/t....i bet he could hit it if he's a good driver

ChrisRT · Post by **ChrisRT** » Tue Mar 28, 2006 7:57 am

E3EsXt02 wrote:y i hit 89 in the 1/4 on a non r/t....i bet he could hit it if he's a good driver

I can bang some gears

dawm · Post by **dawm** » Tue Mar 28, 2006 7:18 pm

the average for 2g magnum is like 126-130 stock, factoring in the CAI and the 17s thats about right.

i did 136whp, but i had 14" 1g R/T wheels and a K&N filter.. wheels do help

ChrisRT · Post by **ChrisRT** » Tue Mar 28, 2006 10:14 pm

I just threw the Thermal R&D at it yesterday, might head to the track friday night, just to see what the ol' turd runs!

I was dynoing on 87 octane as well, not sure what everyone else uses in their R/T's.

MoxHair · Post by **MoxHair** » Tue Mar 28, 2006 10:21 pm

93

Won't buy anything less.

"Premium Fuel Recommended"

I won't argue.. She Loves Premium

Mat · Post by **Mat** » Wed Apr 12, 2006 7:35 pm

ChrisRT wrote:
E3EsXt02 wrote:y i hit 89 in the 1/4 on a non r/t....i bet he could hit it if he's a good driver
I can bang some gears

Pfft.
Just kidding.
Weight redux and 14s on the front are your friend, Chris...but I'm sure you know that.

ChrisRT · Post by **ChrisRT** » Wed Apr 12, 2006 9:20 pm

Mat wrote:
ChrisRT wrote:
E3EsXt02 wrote:y i hit 89 in the 1/4 on a non r/t....i bet he could hit it if he's a good driver
I can bang some gears
Pfft.
Just kidding.
Weight redux and 14s on the front are your friend, Chris...but I'm sure you know that.

You know I can bang some gears, baby

I've got some small slicks, but I don't wanna use'em, maybe I can find a set of drag radials to borrow from someone...

01rtgurl · Post by **01rtgurl** » Wed Apr 12, 2006 10:15 pm

tamadrumr88 wrote:i hit 84 in my r/t dont be so optimistic unless you have an acr

for real? i got 95 hp in my R/T (mustang dyno) what gives with these cars? lol

dinetuner · Post by **dinetuner** » Wed Apr 12, 2006 10:32 pm

hahaha i remember that post....

Post by **Canada** » Wed Apr 12, 2006 10:38 pm

01rtgurl wrote:
tamadrumr88 wrote:i hit 84 in my r/t dont be so optimistic unless you have an acr
for real? i got 95 hp in my R/T (mustang dyno) what gives with these cars? lol

I believe he meant he got 84 MPH in his 1/4 miles trap speed...

01rtgurl · Post by **01rtgurl** » Thu Apr 13, 2006 9:36 am

oh. wtf. how did we start the thread as dyno #'s then evolve into trap speeds????

kc2005ptgt · Post by **kc2005ptgt** » Thu Apr 13, 2006 12:40 pm

Just curious, but why do the pull in 3rd gear? I thought we were supposed to do the pull in 4th because it is closest to 1:1

quicksilvr · Post by **quicksilvr** » Thu Apr 13, 2006 5:07 pm

kc2002acr wrote:Just curious, but why do the pull in 3rd gear? I thought we were supposed to do the pull in 4th because it is closest to 1:1

I was just going to ask that too. After unsuperman's post about his dyno experience, it would seem that third gear would have given higher torque numbers than what ChrisRT got....I'm confuzzled now.

ChrisRT · Post by **ChrisRT** » Sat Apr 15, 2006 11:53 am

I did a pull in 4th gear and got 119/102. It was absolutely terrible.

Everyone I've ever remembered has always done pulls in 3rd gear with neons.