r/t intake mani?

tooslow · Post by **tooslow** » Sat Jun 10, 2006 8:54 pm

hey here the deal I have my 03 running on ms feul only but now the seconderies are not opening. I always thought that it only was activated by rpm and tps I didn't screw with that too much the stock ecu still sees the tps and rpms.

BlackRoseRacing · Post by **BlackRoseRacing** » Sun Jun 11, 2006 10:53 am

Do some research, the Mag manifold will bolt up to the non mag motor, but the secondaries have to be manually setup, the pcm does not know they are there

tooslow · Post by **tooslow** » Sun Jun 11, 2006 11:31 am

I already have an 03r/t but nolw that mega squirt is controlling the feul the seconderies won't open so I just want too know if this is normal or did I clip wire somewhere or messed something up. I just want too know before I go buy rpm switch

kc2005ptgt · Post by **kc2005ptgt** » Sun Jun 11, 2006 7:18 pm

You mat have clipped a wire or something - I though MS just controlled the A/Fr? But I could know nothing about it... there is a way you can hook it up manually... read in the how too - under make your magnum work like the real thing.

tooslow · Post by **tooslow** » Sun Jun 11, 2006 8:21 pm

I think the ecu probly has gone into limp mode so that is why they don't open

BlackRoseRacing · Post by **BlackRoseRacing** » Tue Jun 13, 2006 5:47 am

Try to see if you can pull some codes, if it went into limp mode there should be a hard code stored..