Jean-Seb's 2005 SX2.0 log
Jean-Seb's 2005 SX2.0 log
Well, hello all. Here is a log that will contain most if not all of what I've done to the car so far.
I'm in no hurry to work on this project, so don't hold your breath or anything, but you can always check back if it pleases you.
I was car-free for two years, by choice, until I purchased this rough but lovely little bug. I gained most of my experience working on my previous project, which I sadly never finished: a 1995 Pontiac Grand Am. I performed a 5-speed swap on it as well as installing, wait for it... rear Dodge Neon disc brakes lol. Regardless, I gained valuable experience from it, one important lesson was to never start a mod if you can't finish it properly lol. So, I'm taking this approach to the SX2.0.
Here's the main subject: a 5-speed bright silver 2005 Dodge SX2.0.
It's a basic SX2.0, with no power locks, windows or mirrors. And I like it like that. My goal is to remove useless (to me) systems and make it simpler, easier to work on and more reliable on the whole. It will also be made lighter in the process, which is always good.
I'll be focusing mainly on the engine bay, which in the beginning needed a lot of cleaning. I'm still working on it, because there's some rustproofing (grease) all over the bay but it's baked on. Degreaser doesn't do much so it needs to be WIPED off by hand.
On the first day,
And as it stands now (at the time of this post).
It's a little better, but I'll get there eventually.
So, my first projects were, besides boring maintenance, adding an injector cover and swapping the nasty fuel rail for an older chrome plated unit.
Just in case anybody (noobs mostly) wonders, they are identical and interchangeable. Mine was getting rusty in the "injector tubes" and I had trouble taking one of them out. Otherwise, it was mostly for aesthetic purposes.
On the same day, I installed a freshly painted PT Cruiser 24mm front swaybar with new endlinks. That took care of most of the clunking in the front end. Gotta love when everything works out.
Anywho, stay tuned for more !
And thanks for watching.
J-S
I'm in no hurry to work on this project, so don't hold your breath or anything, but you can always check back if it pleases you.
I was car-free for two years, by choice, until I purchased this rough but lovely little bug. I gained most of my experience working on my previous project, which I sadly never finished: a 1995 Pontiac Grand Am. I performed a 5-speed swap on it as well as installing, wait for it... rear Dodge Neon disc brakes lol. Regardless, I gained valuable experience from it, one important lesson was to never start a mod if you can't finish it properly lol. So, I'm taking this approach to the SX2.0.
Here's the main subject: a 5-speed bright silver 2005 Dodge SX2.0.
It's a basic SX2.0, with no power locks, windows or mirrors. And I like it like that. My goal is to remove useless (to me) systems and make it simpler, easier to work on and more reliable on the whole. It will also be made lighter in the process, which is always good.
I'll be focusing mainly on the engine bay, which in the beginning needed a lot of cleaning. I'm still working on it, because there's some rustproofing (grease) all over the bay but it's baked on. Degreaser doesn't do much so it needs to be WIPED off by hand.
On the first day,
And as it stands now (at the time of this post).
It's a little better, but I'll get there eventually.
So, my first projects were, besides boring maintenance, adding an injector cover and swapping the nasty fuel rail for an older chrome plated unit.
Just in case anybody (noobs mostly) wonders, they are identical and interchangeable. Mine was getting rusty in the "injector tubes" and I had trouble taking one of them out. Otherwise, it was mostly for aesthetic purposes.
On the same day, I installed a freshly painted PT Cruiser 24mm front swaybar with new endlinks. That took care of most of the clunking in the front end. Gotta love when everything works out.
Anywho, stay tuned for more !
And thanks for watching.
J-S
Last edited by Jean-Seb on Fri Oct 10, 2014 7:28 pm, edited 1 time in total.
-
- Spam Avenger!
- Posts: 9017
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
-
- Spam Avenger!
- Posts: 9017
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
Well, in some areas they use a saltier mixture. I do know that the previous owner was commuting on the bridge over the St-Lawrence river near Quebec City and apparently they use an awful lot of salt there. Coupled with a lack of mudflaps, you get magic rocker panels ! They disappear by themselves.
Anyway, I took one of the door mouldings off Saturday and saw that the paint behind it is damaged also. I'm assuming because of the salt as well. It's all bubbley and lighter in color. So the moulding went back on, which makes me mad. grrr...
So instead of getting drunk because of the disappointment, I installed some new allen coil bolts after giving them a quick gloss black spray. I wanted stainless but they don't make them that long apparently. The rest of the engine bay bolts will be stainless though. It's all in the details.
Quick question for you guys: what tool do you use to adjust your headlights ? I've noticed the studs behind them, but can't seem to find a tool that fits them. Thanks for any input.
Anyway, I took one of the door mouldings off Saturday and saw that the paint behind it is damaged also. I'm assuming because of the salt as well. It's all bubbley and lighter in color. So the moulding went back on, which makes me mad. grrr...
So instead of getting drunk because of the disappointment, I installed some new allen coil bolts after giving them a quick gloss black spray. I wanted stainless but they don't make them that long apparently. The rest of the engine bay bolts will be stainless though. It's all in the details.
Quick question for you guys: what tool do you use to adjust your headlights ? I've noticed the studs behind them, but can't seem to find a tool that fits them. Thanks for any input.
Just a quick picture-less update.
I finally adjusted my headlights and I must say I'm disappointed in Chrysler to not have been able to come up with an easy way of adjusting them without having to remove them from the car ! Anyway, it's done and I can see further than 15 feet in front of the car.
I also installed my driver side rad bracket and refreshed the fasteners as well. There's this thing I do now, per occasional demons' idea, I cut the bolts (or just use shorter ones) to make sure they aren't sticking out past the weldnuts. The extra threads won't rust, it saves weight and it will take less time to remove next time I need to ! I also refresh the threaded holes with a tap whenever possible.
I probably won't do much to the car in the next two weeks, but I'll be at it again after that.
I finally adjusted my headlights and I must say I'm disappointed in Chrysler to not have been able to come up with an easy way of adjusting them without having to remove them from the car ! Anyway, it's done and I can see further than 15 feet in front of the car.
I also installed my driver side rad bracket and refreshed the fasteners as well. There's this thing I do now, per occasional demons' idea, I cut the bolts (or just use shorter ones) to make sure they aren't sticking out past the weldnuts. The extra threads won't rust, it saves weight and it will take less time to remove next time I need to ! I also refresh the threaded holes with a tap whenever possible.
I probably won't do much to the car in the next two weeks, but I'll be at it again after that.
Hello again.
I finished cleaning up the engine bay last week, tucked the accelerator and cruise cables, refitted the big rubber bands on the rad hose sleeve. It looks a bit better.
I also bought a new bumper cover and replacement rocker panels (also a welder to do it myself and some POR15).
And I took some pics down in Vermont, last weekend. Beautiful state and perfect roads.
On the sad side of the coin, I found out the engine oil drain plug was the victim of crossthreading. So I'll need to pick up another oil pan... and I'm overdue for the oil change. grrr...
Also I'll need new fog lights. One of them was replaced by my nephew and well... he overtightened it and now the mounting nuts are "welded" to the studs. The second one's lens is damaged due to all the gravel it got hit with.
Anyway, it will be fine once I get this done.
Thanks for watching !
I finished cleaning up the engine bay last week, tucked the accelerator and cruise cables, refitted the big rubber bands on the rad hose sleeve. It looks a bit better.
I also bought a new bumper cover and replacement rocker panels (also a welder to do it myself and some POR15).
And I took some pics down in Vermont, last weekend. Beautiful state and perfect roads.
On the sad side of the coin, I found out the engine oil drain plug was the victim of crossthreading. So I'll need to pick up another oil pan... and I'm overdue for the oil change. grrr...
Also I'll need new fog lights. One of them was replaced by my nephew and well... he overtightened it and now the mounting nuts are "welded" to the studs. The second one's lens is damaged due to all the gravel it got hit with.
Anyway, it will be fine once I get this done.
Thanks for watching !
Alright,
so the cross-threaded drain plug scare was in fact a false alarm. Apparently the bolt head was stripped so they welded a new bolt head on. Still, I already purchased a used oil pan and started to clean it up, removed all of the rough casting marks, and I will be painting it next weekend probably. Pics when it is completed, no teasers. lol
Quick maintenance/project for today: I replaced my accessory belts and installed one that bypasses the A/C compressor.
I've found a belt load of worn out little rocks stuck in the grooves. Bah !
And the new P/S only belt.
I've also found a nearly mint passenger side rad bracket last time I assaulted the junkyard. The ugly...
And the nice one. Nevermind the sad little touch-up paint job.
I'll keep rocking along until winter shows up. Don't be shy, you can leave some comments ! Whatever it is !
so the cross-threaded drain plug scare was in fact a false alarm. Apparently the bolt head was stripped so they welded a new bolt head on. Still, I already purchased a used oil pan and started to clean it up, removed all of the rough casting marks, and I will be painting it next weekend probably. Pics when it is completed, no teasers. lol
Quick maintenance/project for today: I replaced my accessory belts and installed one that bypasses the A/C compressor.
I've found a belt load of worn out little rocks stuck in the grooves. Bah !
And the new P/S only belt.
I've also found a nearly mint passenger side rad bracket last time I assaulted the junkyard. The ugly...
And the nice one. Nevermind the sad little touch-up paint job.
I'll keep rocking along until winter shows up. Don't be shy, you can leave some comments ! Whatever it is !
Weekend update.
So I've been working on preparing a used oil pan for replacement.
Here it is ready for transplant. It'll be installed next weekend.
After a good cleanup...
Now after removing all the rough edges, casting marks and sanding...
And the final result, coated with gray POR15 paint.
I've also deleted the cruise control and tidied up the various lines/cables/hoses that run above the timing belt cover. I was gonna change the torque strut mount bolt (the orange one lol) but rust on the exposed threads kept me from finishing the task. I'll get back to it another day.
Next up: rocker panel repair. I'm not particularly looking forward to it... but it has to get done.
See ya !
So I've been working on preparing a used oil pan for replacement.
Here it is ready for transplant. It'll be installed next weekend.
After a good cleanup...
Now after removing all the rough edges, casting marks and sanding...
And the final result, coated with gray POR15 paint.
I've also deleted the cruise control and tidied up the various lines/cables/hoses that run above the timing belt cover. I was gonna change the torque strut mount bolt (the orange one lol) but rust on the exposed threads kept me from finishing the task. I'll get back to it another day.
Next up: rocker panel repair. I'm not particularly looking forward to it... but it has to get done.
See ya !
-
- 2011 Silver Contributor
- Posts: 309
- Joined: Thu Feb 17, 2011 9:22 am
- Location: Ontario , Canada
-
- Junior Admin
- Posts: 20310
- Joined: Thu May 03, 2007 12:14 pm
- Location: Ashland Ohio
I guess that's a good argument for the splash shield, and timing belt covers.
I am still debating on hacking my brand new, splash shield for the '99, as the oil filter location on the Stratus 2.4 kind of intrudes on the splash shield's real estate.
There aren't many new 1gn ones left in inventory. (I think less than double digit figures) Almost makes you think twice about hacking it.
Bill
1999 neon coupe 2.4 swap
2021 Forester
2000 Neon MTX swap with '02 R/T PCMOlha Koba, a psychologist in Kyiv, said that “anger and hate in this situation is a normal reaction and important to validate.” But it is important to channel it into something useful, she said, such as making incendiary bombs out of empty bottles.
1999 neon coupe 2.4 swap
2021 Forester
Thank you ! Too bad no one will see it.Lantern04rt wrote:that pan turned out great
Can't you sort of bend it out of the way ? Not sure how it looks like with your application, though.occasional demons wrote:I guess that's a good argument for the splash shield, and timing belt covers.
I am still debating on hacking my brand new, splash shield for the '99, as the oil filter location on the Stratus 2.4 kind of intrudes on the splash shield's real estate.
There aren't many new 1gn ones left in inventory. (I think less than double digit figures) Almost makes you think twice about hacking it.
The 2nd gen ones seem small compared to my old car. Oh well, I won't drive it as much as the previous owner in the winter, so I don't think it'll be a problem for me.
Thanks for the comments guys !
Tis' Sunday ! Time for an update.
A couple of weeks ago, I installed the rejuvenated oil pan with a new gasket using the nicest OEM bolts that I had.
There she is, shamelessly showing her insides... Gross !
Now all sealed up and full of fresh synthetic oil. Unfortunately, it does make everything else look like crap now. lol
After that, I trimmed my new rocker panels a bit and coated them with the same paint. That should keep them from rusting from the inside out.
And today, I did a quick common mod: trunk lid carpet. You can also see what my mobile workshop looks like.
I "started" having issues with my starter a few weeks ago and it got much worse this week. So I found one at the junkyard that looked really nice from the outside. And well, it also works the way it should. The solenoid on the old one was the culprit: the motor would turn but it would engage only after 3 or 4 attempts.
After installing it, I cleaned up my intake bellow tube and fixed the inner rings too. One of them moved over one notch and made the whole thing look deformed (you can see it in post #8 ). So I fixed that and I then rotated the tube completely to hide the collar screws. The wire harness that usually runs above the TB is now under it and I hid the IAC and TPS wires too. It looks a little less chaotic in that area now.
See you soon.
A couple of weeks ago, I installed the rejuvenated oil pan with a new gasket using the nicest OEM bolts that I had.
There she is, shamelessly showing her insides... Gross !
Now all sealed up and full of fresh synthetic oil. Unfortunately, it does make everything else look like crap now. lol
After that, I trimmed my new rocker panels a bit and coated them with the same paint. That should keep them from rusting from the inside out.
And today, I did a quick common mod: trunk lid carpet. You can also see what my mobile workshop looks like.
I "started" having issues with my starter a few weeks ago and it got much worse this week. So I found one at the junkyard that looked really nice from the outside. And well, it also works the way it should. The solenoid on the old one was the culprit: the motor would turn but it would engage only after 3 or 4 attempts.
After installing it, I cleaned up my intake bellow tube and fixed the inner rings too. One of them moved over one notch and made the whole thing look deformed (you can see it in post #8 ). So I fixed that and I then rotated the tube completely to hide the collar screws. The wire harness that usually runs above the TB is now under it and I hid the IAC and TPS wires too. It looks a little less chaotic in that area now.
See you soon.
-
- Spam Avenger!
- Posts: 9017
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
That oil pan- beauty, eh?
EDITED to be more appropriate.
EDITED to be more appropriate.
Last edited by Midnight_Rider on Sun Aug 31, 2014 9:32 pm, edited 1 time in total.
Official "I'm Going To Drive My Neon 'til It Dies" Club #10
Smarty pants...
Quick update for now.
Major work on a daily driver, outside, sucks. There, I said it.
So anyway, I got one rocker panel done (well, almost). Still need to smooth it out a bit and paint. But the other one will have to wait until next summer. I didn't realize that doing about 7 feet of tack welds would take that long. So I ran out of time, but anyway, it looks better than before lol. No pics of that just yet.
I've deleted most of my A/C. Still need to remove the condenser in front of the rad and the evaporator inside, then switch my HVAC control panel (with the one from post #6... remember ?). lol
More coming.
Quick update for now.
Major work on a daily driver, outside, sucks. There, I said it.
So anyway, I got one rocker panel done (well, almost). Still need to smooth it out a bit and paint. But the other one will have to wait until next summer. I didn't realize that doing about 7 feet of tack welds would take that long. So I ran out of time, but anyway, it looks better than before lol. No pics of that just yet.
I've deleted most of my A/C. Still need to remove the condenser in front of the rad and the evaporator inside, then switch my HVAC control panel (with the one from post #6... remember ?). lol
More coming.
-
- Spam Avenger!
- Posts: 9017
- Joined: Wed Aug 02, 2006 2:49 am
- Location: Kokomo, IN
Well, apart from almost frying everything by reinstalling my battery the wrong way in, I've done a few little things lately. Hopefully, I'm not boring anyone here though.
So, I replaced my shift cable bushings with the usual world-renowned Booger units and took the opportunity to swap in a PT Cruiser shifter.
I cannot say how much I love this mod. It's exactly what I wanted. It brings the knob higher and closer to the steering wheel and does have a shorter throw. I'll close up that hole in the shift boot for a tighter fit someday.
And as an observation, I gotta say that solid cradle bushings are really not necessary considering the amount of flex that comes from the sheet metal the shifter is bolted to. I'll stitch-weld those next summer, as well as the plate underneath the parking brake handle.
Here it is complementing my salty floor mats. lol
And I then finished off the afternoon by installing my nicer-looking A/C-less HVAC control panel. Everything worked out great for that, almost plug-n-play.
Thanks again for looking. More coming up as usual.
So, I replaced my shift cable bushings with the usual world-renowned Booger units and took the opportunity to swap in a PT Cruiser shifter.
I cannot say how much I love this mod. It's exactly what I wanted. It brings the knob higher and closer to the steering wheel and does have a shorter throw. I'll close up that hole in the shift boot for a tighter fit someday.
And as an observation, I gotta say that solid cradle bushings are really not necessary considering the amount of flex that comes from the sheet metal the shifter is bolted to. I'll stitch-weld those next summer, as well as the plate underneath the parking brake handle.
Here it is complementing my salty floor mats. lol
And I then finished off the afternoon by installing my nicer-looking A/C-less HVAC control panel. Everything worked out great for that, almost plug-n-play.
Thanks again for looking. More coming up as usual.
Last edited by Jean-Seb on Fri Oct 10, 2014 7:12 pm, edited 1 time in total.
- MyNeonSaysHi
- 2GN Veteran
- Posts: 12097
- Joined: Mon May 23, 2005 8:46 pm
- Location: Kansas
Thanks man !
And nice ! I assume he's from the US originally ?
It is pretty for sure, especially right now with all the changing leaves. But it's always prettier when you're from the outside, coming here and seeing this with fresh eyes. All I see now are the careless drivers and potholes.
EDIT: Just added this picture. This gives a better idea of the added height of the shifter (also of how dirty my car's interior really is lol).
And nice ! I assume he's from the US originally ?
It is pretty for sure, especially right now with all the changing leaves. But it's always prettier when you're from the outside, coming here and seeing this with fresh eyes. All I see now are the careless drivers and potholes.
EDIT: Just added this picture. This gives a better idea of the added height of the shifter (also of how dirty my car's interior really is lol).
And the fun continues... but slowly.
I hope everybody here is doing great. I am even though winter's here and things are slowing down a bit.
I'm working on a couple of projects right now. They just take time because they involve epoxy and what not.
Here's a completed one. I found this dirty thing in a poorly modded Neon at the junkyard and just thought I'd try restoring it. The previous owner just glued it inside the center console so there was a lot of glue-removal involved. Try that with freshly-trimmed fingernails... lol
After cleaning it, removing most of the glue and cutting the old boot off of its frame.
Then epoxied on the frame and installed. Not bad for a 3,50$ project. Sorry for the grainy picture, it gets dark so quickly...
So like I said, I'm working on a couple of other projects, but they take time, so bear with me. I also picked up a set of Sebring backing plates since I can't find any Neon ones. The rear disc conversion will be done next summer, just gotta gather parts.
Until next time...
I hope everybody here is doing great. I am even though winter's here and things are slowing down a bit.
I'm working on a couple of projects right now. They just take time because they involve epoxy and what not.
Here's a completed one. I found this dirty thing in a poorly modded Neon at the junkyard and just thought I'd try restoring it. The previous owner just glued it inside the center console so there was a lot of glue-removal involved. Try that with freshly-trimmed fingernails... lol
After cleaning it, removing most of the glue and cutting the old boot off of its frame.
Then epoxied on the frame and installed. Not bad for a 3,50$ project. Sorry for the grainy picture, it gets dark so quickly...
So like I said, I'm working on a couple of other projects, but they take time, so bear with me. I also picked up a set of Sebring backing plates since I can't find any Neon ones. The rear disc conversion will be done next summer, just gotta gather parts.
Until next time...
-
- 2GN Member
- Posts: 132
- Joined: Sun Feb 23, 2014 9:57 pm
they have a trim piece on the leather boot and the srt boot that clips into the center console itself instead of the shifter base like the metal ones do and it sits nicely on there you may try to find one of those to even the boot out on there. plus it adds for easier removal of the boot.
2003 neon se crashed
1998 neon highline Sold
2005 neon sxtSold
2017 Volkswagen CC Rline Exec. 2.0t
"Sorry you are so scared of a possible mechanical problem that you will drive an ugly transportation appliance. I'll keep living a colorful life." -some guy about a camry
thomas_w: Thank you. I knew I had to do something about that gap. I'm glad I found that boot, it looks less incomplete.
neongirl87: Thanks ! It seems I spent all summer working on that car. Oh well, I didn't have anything else to do anyway lol.
blueneo03: Hmmm... I'll look into that someday. But it just seems like I've spent enough time on that part of the car for now lol. Maybe I'll find some black plaid flannel and make a smaller one later. Thanks for the tip though ! By the way, it's in your progress log that I first got the idea that the PT shifter would work in a Neon. So thanks again for that, I love it !
neongirl87: Thanks ! It seems I spent all summer working on that car. Oh well, I didn't have anything else to do anyway lol.
blueneo03: Hmmm... I'll look into that someday. But it just seems like I've spent enough time on that part of the car for now lol. Maybe I'll find some black plaid flannel and make a smaller one later. Thanks for the tip though ! By the way, it's in your progress log that I first got the idea that the PT shifter would work in a Neon. So thanks again for that, I love it !
-
- 2GN Member
- Posts: 180
- Joined: Mon Oct 31, 2011 9:20 pm
- Location: New Hampshire